- Joined
- Feb 13, 2008
- Messages
- 386
- Reaction score
- 0
- Points
- 0
- Location
- DALLAS, TX
- Website
- www.dfwlx.com
Selling 2 Used 10W6 Speakers from JL AUDIO. Been in Storage. Only asking for 400.00 for both. Local Pick up. or shipping is extra
Features: Got the features from the Website.
10" W6v2 Series 4 Ohm DVC Subwoofer
RMS Power handling: 400 watts
Dual 4 Ohms 2.75" diameter, 4-layer voice coils
Kapton voice coil former
Customizable trim ring: can be painted to match installation colors
W-Cone: unibody design, extremely stiff and light
Floating-Cone attach method: ensures proper surround geometry for better excursion and voice coil alignment
Plateau-reinforced spider attachment: relieves stress from the spider at high excursions
Pole and cone venting: removes hot air during high power operation to improve sound quality and reliability
Forced-air-cooled aluminim alloy frame: enhances power handling and sound quality
Highly optimized motor systems: reduce distortion, and improve transient behavior
Large, progressive-roll spiders: optimized to controls long excursion without limiting it
Engineered lead wires and connectors: unique configuration block on one side of the basket, extruded lead wire casing ensures reliability and controlled behavior at extreme excursion
Power Handling: 400W/800W (RMS/Peak) per sub
Nominal Impedance: Dual 4 Ohms
Sensitivity: 83.7dB
Top Mounting Depth: 6.9"
Recommended Sealed Box: 0.50-1.00 cu. ft.
Recommended Ported Box: 0.75-1.25 cu. ft.
VRC" Technology
W-Cone" Technology
Elevated Frame Technology
Floating Cone Attach Technology
NeckVent" Technology
Features: Got the features from the Website.
10" W6v2 Series 4 Ohm DVC Subwoofer
RMS Power handling: 400 watts
Dual 4 Ohms 2.75" diameter, 4-layer voice coils
Kapton voice coil former
Customizable trim ring: can be painted to match installation colors
W-Cone: unibody design, extremely stiff and light
Floating-Cone attach method: ensures proper surround geometry for better excursion and voice coil alignment
Plateau-reinforced spider attachment: relieves stress from the spider at high excursions
Pole and cone venting: removes hot air during high power operation to improve sound quality and reliability
Forced-air-cooled aluminim alloy frame: enhances power handling and sound quality
Highly optimized motor systems: reduce distortion, and improve transient behavior
Large, progressive-roll spiders: optimized to controls long excursion without limiting it
Engineered lead wires and connectors: unique configuration block on one side of the basket, extruded lead wire casing ensures reliability and controlled behavior at extreme excursion
Power Handling: 400W/800W (RMS/Peak) per sub
Nominal Impedance: Dual 4 Ohms
Sensitivity: 83.7dB
Top Mounting Depth: 6.9"
Recommended Sealed Box: 0.50-1.00 cu. ft.
Recommended Ported Box: 0.75-1.25 cu. ft.
VRC" Technology
W-Cone" Technology
Elevated Frame Technology
Floating Cone Attach Technology
NeckVent" Technology