WTB Factory Exhaust

[kilroysneon]

Looking to get the original factory exhaust for my 2005 NSRT-4. I have the exhaust from the rear wheels forward. I have no clue what happend to the one that came on the car...just got it last month. It has a turn down, looks like something from wal-mart, WAY up under the car! about level with the tops of my rear wheels! Let me know if you have one, and how much. This looks rediculous!

 

[loxmith]

I have the stock dual tips sitting in my garage, but I'm not sure if it would do you any good. The exhaust shot that I had put on my single tip, just cut it off. IMO, you'd probably be better off going to a local exhaust shop and have them fab up something nice for you. Probably only cost you around $60 if all you need is the tip/tips done.

 

[kilroysneon]

I have the stock dual tips sitting in my garage, but I'm not sure if it would do you any good. The exhaust shot that I had put on my single tip, just cut it off. IMO, you'd probably be better off going to a local exhaust shop and have them fab up something nice for you. Probably only cost you around $60 if all you need is the tip/tips done.

got a pic of it?

 

[loxmith]

got a pic of it?

A pic of what? The old tips in the garage, or the new tip on the car?

 

[kilroysneon]

A pic of what? The old tips in the garage, or the new tip on the car?

old ones, i only need the tips... well from the rear wheels back.

 

[StealthWyvern]

All he needs is the axle back portion of the stock exhuast.

 

[Dysphagia]

from the pics ive seen you need the exhaust from the turbo back. youd be much better off just buying an aftermarket exhaust with what your gonna spend on shipping.


pardon the spelling/grammar errors im sending thid from my pjone and really have no idea what im typing.

 

[kilroysneon]

from the pics ive seen you need the exhaust from the turbo back. youd be much better off just buying an aftermarket exhaust with what your gonna spend on shipping.


pardon the spelling/grammar errors im sending thid from my pjone and really have no idea what im typing.

true, true... been trying to find something i like

figured to go stock in the mean time. looks kind of strange to have the cut outs in the bumper and nothing poking out!

 

[loxmith]

...looks kind of strange to have the cut outs in the bumper and nothing poking out!

easy fix...roll the bumper

as for the pic I will try to take one and post it here, so you can see what they look like. But IMO, I still think you'll be better off money wise, to have a local shop fab something up for you, rather than buy stock tips, have them shipped, then have them installed.

 

[kilroysneon]

easy fix...roll the bumper

as for the pic I will try to take one and post it here, so you can see what they look like. But IMO, I still think you'll be better off money wise, to have a local shop fab something up for you, rather than buy stock tips, have them shipped, then have them installed.

roll the bumper?:hmm:

wouldnt that involve quite a bit of body work?:unsure:

i just might fab something up myself, break out the MIG and see what i can come up with:rockon:

 

[loxmith]

Stock tips...

Not a lot of body work...takes like 5 min and about 4 zip ties to roll the bumper. You remove two of those body cap screws, then pull back on the tabs, and zip tie them to the frame, making the bumper rolled...

I had to go WAAAYYYYYYYYYY back to find an un-rolled bumper pic.
Stock...

rolled...

 

[kilroysneon]

Stock tips...

Not a lot of body work...takes like 5 min and about 4 zip ties to roll the bumper. You remove two of those body cap screws, then pull back on the tabs, and zip tie them to the frame, making the bumper rolled...

I had to go WAAAYYYYYYYYYY back to find an un-rolled bumper pic.
Stock...

rolled...

thats the part of the pipe i need. may just look into getting a single tip.

already got that done to my bumper. wondered why my bumper looked like that!:dumb: lol thought someone was too cheap to get the clips and just zipped it up there!:grin:

 

[Goats]

i think single is the way to go when i had the duels they were way to loud and now on the single no more hwy drone

 

[loxmith]

^ x2 on the single tip being the way to go...the reason my stock tips are sitting in the garage. :whistle:

 

[kilroysneon]

^ x2 on the single tip being the way to go...the reason my stock tips are sitting in the garage. :whistle:

got the single right now, although to ends above the rear axle. i like loud! lol

but maybe it is just that i have not seen a single tip that i like.

waiting for the tip to my MIG to come in...18 more "buisness" days til it is here:whistle:. it is on back order for some reason. i have everything i need to do it myself here at the house, except for the bender:sly:. but i can buy the pieces pre bent at the parts house. although i havent noticed if i can but the hangers there. guess i should check that out:dumb:

 

[Goats]

got the single right now, although to ends above the rear axle. i like loud! lol

but maybe it is just that i have not seen a single tip that i like.

waiting for the tip to my MIG to come in...18 more "buisness" days til it is here:whistle:. it is on back order for some reason. i have everything i need to do it myself here at the house, except for the bender:sly:. but i can buy the pieces pre bent at the parts house. although i havent noticed if i can but the hangers there. guess i should check that out:dumb:

i guess u should have gotten a snap-on mig like me shits always in stock since my uncle has 2 trucks

 

[kilroysneon]

i guess u should have gotten a snap-on mig like me shits always in stock since my uncle has 2 trucks

LOL not everyone has it like that my friend!