So my rough in is complete. I only fabricated 2 pieces and that was the sheet metal I used for mounting the cooler. All parts were purchased from Summit Racing and Home Depot.
1- EAR-41606ERL Cooler with -6an fittings
2- DER-13032 3/8 compression x 3/8 barbed
1- HDA-106 4.5 ft 3/8 hose
1- SUM-220701 -6an Female Straight to barbed
1- SUM-220711 -6an Female 90 to barbed
Home Depot
4- 3/8-5/8 hose clamps
10ft 3/4 galvanized strut only need 27 inches
2- 1/4 strut nuts
2-1/4 x 1 bolts
Fabbed
2- 1" x 5" sheet metal
8- 1/4 tek screws
I just need to buy some paint and do the final install. Here are the pics.
1- EAR-41606ERL Cooler with -6an fittings
2- DER-13032 3/8 compression x 3/8 barbed
1- HDA-106 4.5 ft 3/8 hose
1- SUM-220701 -6an Female Straight to barbed
1- SUM-220711 -6an Female 90 to barbed
Home Depot
4- 3/8-5/8 hose clamps
10ft 3/4 galvanized strut only need 27 inches
2- 1/4 strut nuts
2-1/4 x 1 bolts
Fabbed
2- 1" x 5" sheet metal
8- 1/4 tek screws
I just need to buy some paint and do the final install. Here are the pics.