"THE PACKAGE" Well here it is - Jected's Whipple 3.4L install

Discussion in 'Engine & Performance Modifications' started by Jected, Oct 22, 2008.

  1. Jected

    Jected Aussie Blown 426

    Messages:
    364
    Likes Received:
    0
    Joined:
    May 4, 2008
    Location:
    Melbourne Australia
    Well here it is, "THE PACKAGE" finally fitted and revealed.

    [​IMG]

    Now powering my purpose built 426 is Whipple's latest generation blower, the 3.4L Whipple Twin Screw and I cannot wait to drive it with this running.

    There is still some fabrication work and fitment of other parts to still go into this, however the guys @ HP/F wanted to fire it up to check things are running right to this stage. They are happy with it and now the fun begins.

    Still left to finish off are things like fitting up my Arrington throttle body, CAI and cold box, gilmer blower drive kit - blower to crank only (no the stock 6pk setup will not be driving the blower - the standard belt from factory will be put back in its place-the blower will be a stand alone belt setup) amounst other things.

    Anyway here are the pics of it so far. Video of it running earlier today will be posted when i receive it.

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. 1fastsedan

    1fastsedan Destroyer of Warranties

    Messages:
    1,933
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    It looks great, but does the hood close?
     
  3. MOL

    MOL SHOW & PERFORMANCE

    Messages:
    1,844
    Likes Received:
    0
    Joined:
    Nov 7, 2007
    Location:
    SAN DIEGO, CA
    looks good but is the hood going to close.
     
  4. 8yourM5

    8yourM5 Full Access Member

    Messages:
    2,367
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    CA
    I knew it was this or the sms blower. congrats man your goig to make some serious power. we need videos ASAP
     
  5. 1bad4dr

    1bad4dr Mr. Meany

    Messages:
    19,670
    Likes Received:
    0
    Joined:
    Oct 10, 2007
    Location:
    Corn Country
    Daniel, Mate, YOU SUCK... lol

    Congrats man. I know it has been a LOOOOOOONG time coming.

    Good thing you posted this now, cause I just ran out of popcorn.. hahaha

    Get some vids up mate.
     
  6. MatFab

    MatFab Full Access Member

    Messages:
    252
    Likes Received:
    0
    Joined:
    Dec 12, 2007
    Location:
    Milford MI
    You have a nice package...
     
  7. 1fastsedan

    1fastsedan Destroyer of Warranties

    Messages:
    1,933
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Jinx. You owe me a beer.
     
  8. Jected

    Jected Aussie Blown 426

    Messages:
    364
    Likes Received:
    0
    Joined:
    May 4, 2008
    Location:
    Melbourne Australia
    LOL.... thanks guys. I am itching to drive this thing like you wouldn't believe.

    The bonnet definitely will not shut as it is with this setup. I am having a bonnet made to suit the new setup and height of the blower which will allow me to drive it on the street. I will also run the standard bonnet with the center cut out to the shape of blower and snout.
     
  9. DRKNE55

    DRKNE55 The Badguy

    Messages:
    4,143
    Likes Received:
    0
    Joined:
    Jan 24, 2008
    Location:
    Oakland, CA
    wow, that is soooooo damn sinister looking. people will def be staring when you roll by.
     
  10. YoungMedic23

    YoungMedic23 Vortech 426 SRT8 Jeep Rollin

    Messages:
    694
    Likes Received:
    0
    Joined:
    Dec 27, 2007
    Location:
    Lancaster, CA
    Get a HUGE FUCKIN COWL HOOD!
     
  11. srt8_hmi

    srt8_hmi My dream is over.

    Messages:
    802
    Likes Received:
    0
    Joined:
    Apr 30, 2008
    Location:
    ohio
    I thought you dropped a 3.4 V6 in that thing!!! Bonnet and Snout, you don't hear those words everyday.. I'd rock that fucker with a huge ass snout or a massive cowl hood(like the ones you see on camaros and mustangs) Dahahahaha!! Very nice man!!
     
  12. DRKNE55

    DRKNE55 The Badguy

    Messages:
    4,143
    Likes Received:
    0
    Joined:
    Jan 24, 2008
    Location:
    Oakland, CA
    it would look soooo much better with an open hood. its not like he will drive it in the rain anyhow.
     
  13. The Max

    The Max Full Access Member

    Messages:
    184
    Likes Received:
    0
    Joined:
    Jan 31, 2008
    That car needs Mad Max/Road Warrior Hood.
     
  14. leepen

    leepen New Member

    Messages:
    473
    Likes Received:
    0
    Joined:
    Aug 31, 2008
    Location:
    Vegas
    Holy crap,,,very nice.....just take the hood off ;)
     
  15. Leadfootluke

    Leadfootluke New Member

    Messages:
    267
    Likes Received:
    0
    Joined:
    Dec 13, 2007
    Looks amazing.

    I cant wait to see the hood, and then hear it running.
     
  16. NetNathan

    NetNathan Not the Momma

    Messages:
    1,790
    Likes Received:
    0
    Joined:
    Nov 9, 2007
    Location:
    Corona, CA
    Is there an intercooler in the base?
     
  17. Blown-WK

    Blown-WK cherokeesrt8 survivor!

    Messages:
    630
    Likes Received:
    0
    Joined:
    Dec 18, 2007
    Location:
    Jacksonville, FL
    Very fockin sick. I can't wait to hear this shit run. Wow a 3.4 blower:hypno: That is insanely large for a twin screw.
     
  18. vinnysrt8

    vinnysrt8 Full Access Member

    Messages:
    414
    Likes Received:
    0
    Joined:
    Jun 10, 2008
    Wow it is sick how much r they going to cost,
     
  19. Jected

    Jected Aussie Blown 426

    Messages:
    364
    Likes Received:
    0
    Joined:
    May 4, 2008
    Location:
    Melbourne Australia
    Hey mate.

    The core is a cupronickel unit, rated for applications 1500hp+ and fills the entire manifold top to bottom.
     
  20. 8yourM5

    8yourM5 Full Access Member

    Messages:
    2,367
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    CA
    Call PPP they are selling these bad boys