NEW! TCE/Wilwood Rear Drag kit: $969 TCE is please to introduce to the Drag Racing market a very cool rear kit designed for the use of 15" rear drag wheels! This kit can be run on the street in place of the stock rear brake system or easily fit before going to the track. Currently available for SRT spindle but soon for R/T model also. * Wilwood DP four pot caliper (4 piston) * Stainless Steel pistons for greater heat rejection * BP10 street pads * Radial mount brackets * Custom 12.25" rotor * Zinc plated * Retains stock parking brake * Stainless steel hose kit * All required hardware * Optional RED powder coat finish: ADD $125 * Optional Poly D track pads: ADD $50
John, Be sure to tell the folks interested in buying this kit there are some other suspension modifications that need to be done other then the brake kit in order to get a 15" wheel to fit.
That information is highly classified I will need to get written approval from the higher ups! I'll look into it though!
Eh it's OK I know Cam did the swap and knows whats needed so I will just send the guys who order this kit to him for the info.
Hope there local, it took 7 hours to do the mods! You need a press, a welder, an assortment of steel for fabrication, and a mill for modifying a excisting part. Definetly not a walk in the park, Oh and a 15" wheel with the right offset prior to the mods being done. I was told I dont have clearance to spill the beans. Im sure you'll figure it out once you tackle it.
