Stock turbo question

Discussion in 'Engine & Performance Modifications' started by Wozzy, Jan 20, 2008.

  1. Jan 20, 2008 at 5:32 PM #1
    Wozzy

    Wozzy Boost Me!

    Messages:
    2
    Likes Received:
    0
    Joined:
    Dec 23, 2007
    Location:
    Idaho
    --------------------------------------------------------------------------------

    I'm just about to install the stock SRT-4 setup on my 03 SXT, I just need some little things, fittings! Don't want to use the stock banjo bolts and lines. Custom, and more reliable for me.

    So my question is; what size fittings fit into the threads on the turbo for the 3 holes; oil feed, coolant feed, and coolant return. I believe it's -6 AN, 3/8 NPT? But I'm not sure, I've looked in the FSM but that didn't help me any.

    All replys are appreciated. Thanks
     
  2. Jan 20, 2008 at 5:59 PM #2
    master_1011

    master_1011 The Man.

    Messages:
    2,758
    Likes Received:
    0
    Joined:
    Dec 3, 2007
    Location:
    Ventura, CA
    Whats wrong with the stock banjo bolts or lines??
     
  3. Jan 20, 2008 at 6:08 PM #3
    Wozzy

    Wozzy Boost Me!

    Messages:
    2
    Likes Received:
    0
    Joined:
    Dec 23, 2007
    Location:
    Idaho
    Nothing, I'd just like to do the install a little more to my liking.
     
  4. Jan 20, 2008 at 9:27 PM #4
    StillANeon

    StillANeon Full Access Member

    Messages:
    968
    Likes Received:
    0
    Joined:
    Dec 20, 2007
    Location:
    Kansas
    That might run you into more problems.


    Thats a hard question to answer though. Might have to contact the people that made the turbo. Its a Mitsubishi turbo right?

    Thats so cool that you are doing the swap on an 03sxt. I have a buddy that has an 00 with the SRT-4 powerplant, but its still an AUTO! But his Auto can hold up to 700 horses. Try 2gn.org. They are very knowledgeable over there and there are a ton of swaps going on. You would be very welcome there. :D