SHR CNC Ported cylinder heads!

[SOUTHERNHOTROD]

SHR CNC Ported cylinder heads for 6.1L HEMI

$2200 + $1000 core charge. Add $225 for Titanium retainers.

Features:

Full CNC port work

Hand finish/ blending

Competition Radius Valve job

CNC chamber work

Competition Valve Springs good for .600" lift cams

Custom valve spring locaters

Optional Titanium valve spring retainers

If you have any questions, just PM me or give me a call!

**NOTE**
Pricing can change at ANY time, without warning.

 

[Cam]

Hey Southern, got any dyno runs with this set-up??.

 

[SOUTHERNHOTROD]

Hey Southern, got any dyno runs with this set-up??.

Not yet.

We will be installing a set on the SHR Charger and it will go to the track. Cam selection is up in the air right now.

Currently the SHR Charger is running 12.60's @ 112.39 MPH on test heads and custom camshaft.

 

[sgtstanko]

SHR CNC Ported cylinder heads for 6.1L HEMI

Introductory pricing will be $1900 + $1000 core charge for the first five sets.

This will include:

CNC port job
Hand finish
Radius valve job
Manley NexTec valve springs
Manley Titanium retainers

More spring options coming soon!

If you have any questions give me a call.

Normal pricing...

CNC port job only = $1450

CNC port job + Radius valve job = $1650

Hand finish = $300

Manley NexTec Springs = $255

Manley Titanium Retainers = $225

Total = $2430 + $1000 core charge.

**NOTE**
Pricing can change at ANY time, without warning.

Eddie...........nice job!! Those look real good. I see alot of detail....especially the exhaust.

 

[SOUTHERNHOTROD]

Eddie...........nice job!! Those look real good. I see alot of detail....especially the exhaust.

That's not even the hand finished version!

 

[SOUTHERNHOTROD]

We should have some sets ready by the middle of the month!

 

[SOUTHERNHOTROD]

Got the first sets in today!

Check them out.

 

[HoP Racing]

Why did you cut down the bridge between the intake and the exhaust viewed from the combustion chamber side? The area I'm talking about is the space directly between the intake and exhaust valve.

 

[HoP Racing]

the area is the red line

 

[SOUTHERNHOTROD]

Why did you cut down the bridge between the intake and the exhaust viewed from the combustion chamber side? The area I'm talking about is the space directly between the intake and exhaust valve.

To un-shroud the valves. Not much material was removed.

 

[HoP Racing]

To un-shroud the valves. Not much material was removed.

Unshrouding valves would be the red correct?

 

[SOUTHERNHOTROD]

Unshrouding valves would be the red correct?

And the center.

 

[SOUTHERNHOTROD]

The people I use for porting do a lot of Super Stock HEMI's. I am sure they know what they are doing.

 

[HoP Racing]

That area is not removed. I would say it is cleaned up.

You have a set of heads available for testing? 392 cid engine based on a 5.7L block. If you have a set of 5.7 heads that you'd like to send over for this test I'll be more than happy to add them to the shootout. What I need is

1) Retail Price
2) Head Gaskets
3) Exhaust Gaskets
4) Head Bolts

You get a comparison against other manufacturers and magazine ink in "Fastest Street Car" magazine. It's going down next week, you in? You can read more about it in my section of the vendor forums.

 

[SOUTHERNHOTROD]

You have a set of heads available for testing? 392 cid engine based on a 5.7L block. If you have a set of 5.7 heads that you'd like to send over for this test I'll be more than happy to add them to the shootout. What I need is

1) Retail Price
2) Head Gaskets
3) Exhaust Gaskets
4) Head Bolts

You get a comparison against other manufacturers and magazine ink in "Fastest Street Car" magazine. It's going down next week, you in? You can read more about it in my section of the vendor forums.

No 5.7L stuff yet.

 

[SOUTHERNHOTROD]

Material in the center was reshaped for better flame travel, and to un-shroud the valves.

 

[sgtstanko]

Congrats!!!!!!

Eddie
Congrats on your new product line. Those heads are "beautiful"...:deshade:!!!!!

 

[SOUTHERNHOTROD]

Eddie
Congrats on your new product line. Those heads are "beautiful"...:deshade:!!!!!

Thanks!

 

[SOUTHERNHOTROD]

Here is a pic with PAC Racing springs . . .

 

[SOUTHERNHOTROD]

I forgot to updat this thread

New heads are on the SHR Charger SRT-8.

I ran a 12.55 @ 113 and a 12.56 @ 114 on 20" street tires! These times are with a 1.91 and 2.01 60' times.

Shorter tires & better traction and the 11's are a coming! :king: