Pedders needs Training LXs all over the USA!! Pedders is expanding faster than we can build it. We need training LXs all over the USA. Here is where we currently need them: 1. San Diego, CA 2. Van Nuys, CA 3. SF Bay area, Ca. 4. Modesto, Ca 5. Seattle, Wa area 6. Upper (Rochester) PEDDERS DAY SEPT 20THAND lower New York (Long Island area) 7. New Jersey, Central east area 8. Phoenix, Tempe Tucson, Az 9. Clinton, Mi 10. Morrow, Ga 11. Oswego, Ill 12. Martinsville, VA 13. Chambersburg, Pa 14. Addison, Ill The system must be a TRACKII and you willb e given a 25% discount on parts and labor. This system is substantial, and includes almost all the bushings, front aThe reviews have been fantastic. So if you are interested, check out the pedders web site to see all the parts, at Pedders Suspension Pedders Suspension - Pedders Suspension - More than just great products... No Bull Also you can see a install photo shoot at http://rides.webshots.com/album/565278902mdyuwv mike dms
I take it JBA didn't work out in San Diego? Who did you eventually find that wants to participate. Also, does the Track II setup have adjustable dampening?
Here's the full Track II kit https://secure.merlinsoftware.com.a...ode=LX+TRACK+II&Level1=CHRYSLER&Level2=MAGNUM Here's the Track II (bushes only) kit https://secure.merlinsoftware.com.a...LX+TRK+BUSH+KIT&Level1=CHRYSLER&Level2=MAGNUM
Pedders Teams up with CMJ Performance in Ill, & work together to upgrade RedFox0099's I am VERY pleased to announce that Pedders USA has a new dealer, CMJ Performance 107 West Fullerton Ave Addison Il 60101 (630)628-0005 Jeff and John have been a major influence in the LX community with their upgraded rear end assembly, engine work, ad major chasis upgrades. I have seen their work first hand on my most favorite training Magnun I have done in Las Vegas that is located in my signature. A pictorial review of the install is available by a link. Please note the rear end assembly that is in this unit was done by CMJ and is also in RedFox0099's Magnum. I will be flying out there on the first week of October for training. We will be having a Pedders Day event on Sunday, October 5th. As a special treat, Pedders will have lots of vehicles we have sponsored at Sema this year. But we just squeezed one more in. We have partnered up with CMJ Performance to upgrade RedFox0099 chasis. We will be doing a complete TrackII with heavy emphasis on drag racing. He is also putting in a new 426 Hemi, custom built for a Procharger application. As a special note, we will be doing a live video streaming of the installation and upgrade of the entire chasis, transmission, and engine. We are looking for additional training vehicles if you have any interest. On the Pedders Day, we will be doing our 28 point inspections at no charge. You will be able to see and find out what shape your radius rod and Xmemember bushings are in. We will show you! Plus there will be 10% discounts on all Pedders parts sold on this day, plus another 10% discount o labor to install the Pedders bits that are associated with this Pedders Day. PLUS LIFETIME WARRANTY ON ALL PEDDERS PARTS sold on this day when installed by CMJ. Also, come and see and learn about the benefits of our tire scrub bushing kit, and find out how easy it can be to install. Hope to see all of you there. This is a great opportunity to see why Pedders is exploding accross the entire USA and why we have a very serious amount of requests for sponsorships for SEMA this year! thanks, mike dms
Great to know their is a dealer alittle closer than Waukegan, if you need a charger with a full track package to do demos in let me know I live on the northwest side of the city near Ohare that would be great. I do not think we will be able to r/t or demo RedFox0099s ride. Motor is also coming out. mike dms
just finished doing the suspension on a new SRT 8 that is going to Germany to be raced and checked at the "Ring" We set the suspension, a Pedders Track II system for very aggresive driving. The engine is still under testing, but is expected to be able to hit the 190mph range. Next week, Sept 29th thru Oct 5, I will be at CMJ for Pedders certification. We will be doing a couple of vehicles. We will have a live video on the install. the Magnun will not just get a TrackIi system, but will also get a custo built 426 hemi and a procharger. CMJ makes a killer rear end assembly that is way beyond OEM I am looking forward meeting all of you and working with tem mike dms
Not sure of all the issues, but CMJ is closing their doors in a month or so. John, the main tech there and the driving force, is now at Modern Muscle. John is a great guy and very knowlegable. So our Pedders day next week is cancelled. Fortunately, Modern Muscle is strong and alive. Judging by the very serious amount of LX owners coming in and watching us do a Track II on a new SRT8, and staying 4-5 hours because they are awed in the work it takes, and then ordering TrackIIs, the Modern Muscle event will be very big this Saturday. We will have a TrackII available for all of you to drive. Modern Muscle has sold 2 TrackIIs and a TrackII bushing kit already and we have not event had a Pedders day yet!!. So if you want to come on down and check it out, we welcome you to come in and watch what we are doing, and answer any questions that you might have. We are also doing a bunch of Touring packages theat are really cool. Track IIs are really cool, but not meant for everyone. The Touring package is awesome. So the Oswego/Addison Ill Pedders event will be this Saturday, the 27th, at Modern Muscle. Please understand the head guy at CMJ is now at Modern Muscle. You will have to talk to John to find out why. But I can tell you John is one happy camper coming to Modern Muscle. Pedders, Pete Bascia and myself, wish the very best for Jeff Hume at CMJ Performance mike dms __________________
