Restomod 426 Hemi Stroker: The engine is dyno tested and calibrated to where the customer has a drop-in turn key engine that will start and run great when installed properly. The AEM controller still has plug and play capabilities for custom calibration. Specifications: Bore 4.080 torque plate honed Stroke 4.080 4340 forged crank 4340 H-beam Rods CNC heads with performance valves and springs. 80mm throttle body with manual linkage AEM controller and wiring harness Comp Cams 279/285 .547 lift cam ATI balancer SRT-4 fuel injectors Shipping crate and stand List Price $19500.00 MPSC Price$17700.00 There is no core charge on this engine. http://www.moparsupercenter.com/stanton-racing-426-hemi-efi-600hp75600.html Stanton Racing 426 Hemi EFI 600hp Modern Hemi Replacement The engine is dyno tested and calibrated to where the customer has a drop-in turn key engine that will start and run great when installed properly. This engine will require custom tuning to run correctly. Specifications: Bore 4.080 torque plate honed Stroke 4.080 4340 forged crank 4340 H-beam Rods CNC heads with performance valves and springs. Comp Cams 279/285 .547 lift cam ATI balancer SRT-4 fuel injectors Shipping crate and stand List Price $17500.00 MPSC Price$15600.00 There is no core charge on this engine. http://www.moparsupercenter.com/sta...efi-600hp-modern-hemi-replacement75600lx.html Stanton Racing 360 Magnum 360 Magnum 455hp-460tq test with 780 Holley and 93 octane BP fuel. 360 Magnum block is race prepped with torque plate honed cylinder bores, square decked block and align honed main housings. Specifications: Internally balanced with 3.58 stroke crankshaft KB coatd 4.020 hypereutectic pistons Scat 4340- 6.124 I beam rods Moly ductile rings Clevite 77 bearings Roller Cam 228/231 108 centerline .500 lift Roller Lifters Roller Rockers with 1.6 ratio Chromalloy push rods Aluminum Edlebrock Magnum Heads with dual springs Single palne Indy Manifold Moroso 8 quart pan and pick up Cast aluminum Mopar Valve Covers Engine is completely assembled and dyno tested. Includes distributor and plug wires. List Price $11950.00 MPSC Price$10740.00 There is no core charge on this engine. http://www.moparsupercenter.com/stanton-racing-360-magnum-7545575455.html Stanton Racing 410 Magnum 410 Magnum 500hp-510tq test with 780 Holley and 93 octane BP fuel. 410 Magnum block is race prepped with torque plate honed cylinder bores, square decked block and align honed main housings. Specifications: Internally balanced with 4.00 stroke forged 4340 crankshaft Diamond Forged Pistons 4.040 bore Scat 4340- 6.124 I beam rods Moly ductile rings Clevite 77 bearings Roller Cam 230/234 108 center line with .501/.517 lift. Roller Lifters Roller Rockers with 1.6 ratio Chromalloy push rods Aluminum Edlebrock Magnum Heads with dual springs Single palne Indy Manifold Moroso 8 quart pan and pick up Cast aluminum Mopar Valve Covers Engine is completely assembled and dyno tested. Includes distributor and plug wires. List Price $11850.00 MPSC Price$11382.90 There is no core charge on this engine. http://www.moparsupercenter.com/stanton-racing-410-magnum-7550075500.html Posted Prices do not include shipping. Jeff
