New best track time

Discussion in 'General Discussion' started by CentralTexHemi, Sep 22, 2008.

  1. CentralTexHemi

    CentralTexHemi PUNISHER

    Messages:
    5,844
    Likes Received:
    0
    Joined:
    Dec 19, 2007
    Location:
    Tejas
    12.76...Well here is the best I could do before the track got so wet in the bleach box. My mods are B&G tune and BWoody. After this run I let it cool down for 2 hours and the temps dropped but the damn staging area was so wet I spun all 4 tires out of the box the rpms climbed and pushed me into 2nd so quick it bogged down, got back into and pulled of a 12.9,ugggghhhh I know it had a 12.6!!! in it so it was frustrating but still fun.

    [​IMG]

    Here is my DA corrected time:

    Based on:
    Temp: 73.9°
    Humidity: 55%
    Track Altitude: 477 feet
    Pressure: 30.03 in.
    1/4 mile
    Density Altitude = 1628 feet
    Uncorrected 12.76 @ 105.47
    Corrected 12.53 @ 107.35

    1/8 mile
    Based on:
    Temp: 73.9°
    Humidity: 55%
    Track Altitude: 477 feet
    Pressure: 30.03 in.
    Density Altitude = 1628 feet
    Uncorrected 8.11 @ 84.06
    Corrected 7.97 @ 85.56
     
    Last edited: Sep 22, 2008
  2. JimIsland-SRT8

    JimIsland-SRT8 Full Access Member

    Messages:
    124
    Likes Received:
    0
    Joined:
    Feb 27, 2008
    Location:
    James Island SC
    Great time for a fairly stock Jeep. Looks like you've got a strong one!! Congrats
     
  3. CentralTexHemi

    CentralTexHemi PUNISHER

    Messages:
    5,844
    Likes Received:
    0
    Joined:
    Dec 19, 2007
    Location:
    Tejas
    Thanks I'm enjoying it hopefully my BWoody drop springs will be in this week
     
  4. peteblksrt4

    peteblksrt4 USER BANNED

    Messages:
    90
    Likes Received:
    0
    Joined:
    Jun 11, 2008
    Location:
    hubert, nc
    nice time :)

    keep them coming ;).
     
  5. Cheatek

    Cheatek SRT once, SRT always

    Messages:
    5,628
    Likes Received:
    0
    Joined:
    Nov 27, 2007
    Location:
    Nor Cal
    Wow Wade, nice! No fat chicks in the back on that run that's for sure, lol!
     
  6. CentralTexHemi

    CentralTexHemi PUNISHER

    Messages:
    5,844
    Likes Received:
    0
    Joined:
    Dec 19, 2007
    Location:
    Tejas
    nope no fatties FTW-LOL
     
  7. Patrick G

    Patrick G New Member

    Messages:
    157
    Likes Received:
    0
    Joined:
    Jan 10, 2008
    Nice ET Wade. You'll really like the BWoody springs. They have improved the ride of my Jeep. The stance is pretty mean too. Look forward to going out in some of this cooler weather!
     
  8. markus

    markus Silver Supporting Members

    Messages:
    7,534
    Likes Received:
    0
    Joined:
    Nov 16, 2007
    Location:
    Trashcanistan
    wade we all know you love having the fatties in your truck. great times broski's
     
  9. leepen

    leepen New Member

    Messages:
    473
    Likes Received:
    0
    Joined:
    Aug 31, 2008
    Location:
    Vegas
    nice run :)
     
  10. Bud

    Bud GG EVO IX MR

    Messages:
    3,949
    Likes Received:
    0
    Joined:
    Oct 14, 2007
    Wade - where was that at? I was in Georgetown the past few days...that would have been cool to come out there and run the car at a quarter mile track! EVERYONE feel free to withhold any ensuing comments! LOL
     
  11. 1bad4dr

    1bad4dr Mr. Meany

    Messages:
    19,670
    Likes Received:
    0
    Joined:
    Oct 10, 2007
    Location:
    Corn Country
    Congrats Wade.

    Looks like you are really starting to come into your own driving down the 1320.

    Obviously the tune and CAI helps a lot, but your recent ventures are due to good driving abilities.
     
  12. CentralTexHemi

    CentralTexHemi PUNISHER

    Messages:
    5,844
    Likes Received:
    0
    Joined:
    Dec 19, 2007
    Location:
    Tejas
    Bud that was a track just east of Waco maybe 20 minute drive on Hwy 84 and Ron Thanks, prep work really does help even if its a tenth
     
  13. TXSkyeSRT8

    TXSkyeSRT8 New Member

    Messages:
    345
    Likes Received:
    1
    Joined:
    Dec 19, 2007
    Location:
    Hico, TX
    So, I need to contact Andy at B&G for the tune like yours, right Wade?
     
  14. CentralTexHemi

    CentralTexHemi PUNISHER

    Messages:
    5,844
    Likes Received:
    0
    Joined:
    Dec 19, 2007
    Location:
    Tejas
    Yes and since you saving money on plugs, tires and rotors/pads (GO R1) order the same wideband a/f guage as mine and I will put it in for ya that way we can dial in your tune and you can start whooping on me at the track
     
  15. TXSkyeSRT8

    TXSkyeSRT8 New Member

    Messages:
    345
    Likes Received:
    1
    Joined:
    Dec 19, 2007
    Location:
    Hico, TX
    damn man, last time I was on the road you got me all fired up about murdering. Now I'm getting super excited about getting my jeep running great.
    Yes I'm going with R1 rotors.
    Do I need the Wideband before the tune so we can establish a baseline?
    How much was your WB setup?
     
  16. nevinsrt

    nevinsrt Getaway driver for hire

    Messages:
    14,747
    Likes Received:
    0
    Joined:
    Nov 7, 2007
    Location:
    Albuquerque, NM
    Awesome wade!!
     
  17. CentralTexHemi

    CentralTexHemi PUNISHER

    Messages:
    5,844
    Likes Received:
    0
    Joined:
    Dec 19, 2007
    Location:
    Tejas
  18. TXSkyeSRT8

    TXSkyeSRT8 New Member

    Messages:
    345
    Likes Received:
    1
    Joined:
    Dec 19, 2007
    Location:
    Hico, TX
    doesn't your gauge have SRT on the face?
    Does that kit include everything I'll need?
     
  19. CentralTexHemi

    CentralTexHemi PUNISHER

    Messages:
    5,844
    Likes Received:
    0
    Joined:
    Dec 19, 2007
    Location:
    Tejas
    Yes all you need is in the kit, the face I had someone make it for me not sure if they still make them but I can check
     
  20. TXSkyeSRT8

    TXSkyeSRT8 New Member

    Messages:
    345
    Likes Received:
    1
    Joined:
    Dec 19, 2007
    Location:
    Hico, TX
    It okay, I am copying everything you do enough as it is.
    I didn't know it was custom made for you.