LMI – LegMakerIntakes The Specifics Products: • “Hammer Design” Intake (My version of the original Airhammer with the authorization from the originator of the design) $289.99 o Carbon Fiber construction o Unique fabrication process resulting in smooth inner surface to ensure smooth airflow o S&B Filter with 4 layer protection (oil type) o Silicon coupler made of 4ply construction for long term durability o High quality “T”-bolt band clamps o Available to fit both stock and 90mm throttle bodies o Drilled for IAT sensor with rubber grommet for secure fit o Oil breather filter (red,blue,silver) o All necessary hardware and instruction for DIY installation • “Frankentake” III Design $159.99 o Carbon Fiber construction o Unique fabrication process resulting in smooth inner surface to ensure smooth airflow o 4” diameter carbon fiber tube o S&B Filter with 4 layer protection (oil type) o Hi-temp rubber coupler o High quality “T”-bolt band clamps o Available to fit both stock and 90mm throttle bodies o Drilled for IAT sensor o Oil breather filter (red,blue,silver) o All necessary hardware and instruction for DIY installation • “Frankentake” IV Design $199.99 o Carbon Fiber construction o Unique fabrication process resulting in smooth inner surface to ensure smooth airflow o 4” diameter carbon fiber tube with 45* bend to allow for placement of filter over air intake opening in fender well o S&B Filter with 4 layer protection (oil type) o Hi-temp rubber coupler o High quality “T”-bolt band clamps o Available to fit both stock and 90mm throttle bodies o Drilled for IAT sensor o Oil breather filter (red,blue,silver) o All necessary hardware and instruction for DIY installation • LMI True CAI $324.99 o Fender mounted filter for true cold air induction o 4” diameter carbon fiber tubes o Unique fabrication process resulting in smooth inner surface to ensure smooth airflow o Hi-temp rubber / silicon couplers o S&B Filter with 4 layer protection (oil type) o High quality “T”-bolt band clamps o Available to fit both stock and 90mm throttle bodies o Custom 3 ½” mild steel flange to mount filter in fender opening o Oil breather filter (red,blue,silver) o 18” IAT extension harness INCLUDED to relocate sensor o All necessary hardware and instruction for DIY installation K&N Drycharger pre-filter available as option for filter protection for additional $ 30.00 • LMI Whipple (Short) $199.99 o Carbon Fiber construction o Unique fabrication process resulting in smooth inner surface to ensure smooth airflow o Silicon coupler made of 4ply construction for long term durability o High quality “T”-bolt band clamps o Available to fit both stock and 90mm throttle bodies o C&L filter with unique angled flange to allow for placement of filter over air intake opening in fender well o All necessary hardware and instruction for DIY installation • LMI Whipple (True CAI) $349.99 o Fender mounted filter for true cold air induction o 4” diameter carbon fiber tubes o Custom 45* angled carbon tube at throttle body o Unique fabrication process resulting in smooth inner surface to ensure smooth airflow o Hi-temp rubber / silicon couplers o S&B Filter with 4 layer protection (oil type) o High quality “T”-bolt band clamps o Available to fit both stock and 90mm throttle bodies o Custom 3 ½” mild steel flange to mount filter in fender opening o Oil breather filter (red,blue,silver) o 18” IAT extension harness INCLUDED to relocate sensor o All necessary hardware and instruction for DIY installation o K&N Drycharger pre-filter available as option for filter protection for additional $ 30.00 * LMI is also capable of handling many unique and custom projects for its customers. All custom orders will be dealt with on a case by case basis. Shipping Charges: Continental 48 states Ground - $15.00 Two Day - $30.00 Overnight - $50.00 Returns / Warranty: LMI stands behind EVERY intake delivered. If for some reason there is an issue, simply pm or email me at [email protected] and your issue will be taken care of and to the satisfaction of all parties involved. All carbon components to any intake have a lifetime warranty. If it fails (under normal use/operation), or you are not happy, LMI will replace the failed component or refund your money! No questions ask!!!
Everything looks great Chris and the prices are very competitive. Best of luck on your new enterprise.
thanks hal...... yeah, i don't think you will find anyone that can/will sell REAL cf products similar to these designs at these kind of prices!!! helps when you are the one actually making the products!!! lol btw - these are not introductory prices...... this is what they will sell for period!!! lol
thanks ralph........ what unit would that be pray tell???? :grin: i thought ralph had a vortech...... :dumb:
dude, i took that thing off a long time ago. i currently have an afe II on the 300. i want to take the afe off my 300 srt and get something that does not rub the hood. if you have a blem that would be perfect for what i want to do.
No chit?? Good for you buddy.Prices are very fair IMO.Good luck with your new biz.Any thing I can do to help please dont hesitate to ask.
Holy cow Chris! Do your employees know you're selling this stuff for these prices! :grin: This has got to be less than 1/2 similar stuff and far better quality. Outstanding. You might want to re-word your guarantee just a bit and add "under normal use" or something to that effect. I know CF is durable but if someone runs into something and it gets squashed are you going to replace it?
You are making units for the 3.5L and 2.7L crowd also ? Just wanted to make sure before i helped spread the word . They have been asking for a while so you would be hit with a few orders i would think .
thanks buddy!!!! yes, my employees know the pricing..... me, myself, and I.....lol easier to offer lower prices when you do it all yourself!!! lol as for the warranty...... good point...... might do that! lol OH YES!!!! i have the v6 guys covered.... send them my way!!! lol this is the prototype for the 2.7 guys. the polished alum. piece you see is not how the finished product looks.... it has a 3" cf tube instead of the polished alum. this particular car just dyno'd yesterday and picked up 7 rwhp and 2 rwtq. nothing to be over whelmed, but for the v6 guys, this is pretty decent! it will also be supplied with the same S&B filters as the rest of my kits the 3.5 guys will be getting a system that looks alot like the whipple short. just picture this set up on a 3.5 v6....
You got it . I have been asked by many . Seems they have been left out in the cold.....till now . Sweet looking piece for sure . Will you be advertising elsewhere ( LXF , ETC ) or does that get complicated . I see this doing very well at these prices . Hey can you make one that looks like the leg lamp in Christmas story ? That would be fuggin awesome.......lol .
thanks mike!! i have vendor requests at other forums. i did not list any of the v6 stuff here because this is a forum targeted at the srt crowd!! lol i really think the v6 crowd might be some of my biggest customers though!!! not a lot out there for them!!
Just wanted to pop in [it's been a while] and congratulate you on LMIs. The products look great and are VERY affordable. Is Scott still selling the AirHammer and getting it made through you? Just curious. Keep up the good work Chris!
I said when I saw your work that you would have your hands full, but with that pricing you´ll probably need more hours every day just to keep up... Keep up the good work! Fredrik:miner:
thanks luke!! yes, scott is still selling his CFAH. we still have the same agreement we have had in regards to production of his product. if you ever see mine and his next to each other, they are different. not a lot, but different. we have made other arrangements in regards to doing my version of his design. SCOTT IS THE ORIGINATOR OF THIS PARTICULAR DESIGN!! i have just been able to offer this great design at a price point that is hard to beat!!! thanks!!! tell me about it!! :grin:
