Latest Mods: 2tone Flat Black Vinyl.....Grip Rockers....

Discussion in 'General Discussion' started by BOSChargerSRT, Mar 20, 2011.

  1. Dookie

    Dookie Foe twenny sics

    Messages:
    2,884
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    Baton Rouge, Louisiana
    What did Grip say?
    I would line up the body lines and re-drill/elongate the rocker panel to fit the car.
     
  2. BOSChargerSRT

    BOSChargerSRT Full Access Member

    Messages:
    559
    Likes Received:
    0
    Joined:
    Feb 29, 2008
    Location:
    Boston
    I did bother calling them. I'm passed fed up with all this and not in the mood to deal with anyone. Plus there already painted. Only thing I can do is try my best to even it out and deal with it.
    So far pax side even out the gap and plastic rivet the front and now doing the rears. The driver side has more gap in the front, so leaves more of a gap between the body and rockers. Pax gap isn't as bad. I already went through 8 clips and had to order more and they'll be in tomorrow. Shit, I'll just take the driver side off again and line it up like the pax. There goes 3 more clips. :(

    This has been a shitty experience to say the least. I had better luck with my old RKSport rockers.
     
  3. SRTLUVR

    SRTLUVR Detailing "Go-to" Guy

    Messages:
    3,018
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    Birmingham, AL
    Damn Jimmy. I KNOW THE FEELING bro. Sorry you're having to deal with this shit pimp.....I hear Grip Rockers ordered from SpeedLogix fit PERFECT lol..... ;)
     
  4. BOSChargerSRT

    BOSChargerSRT Full Access Member

    Messages:
    559
    Likes Received:
    0
    Joined:
    Feb 29, 2008
    Location:
    Boston
    Thanks Chase! Just wish for once something went without a hitch. Trying to take pix, but it's snowing light in spring here. Shit! Waiting for it to stop and luckily no accumulation.
     
  5. BOSChargerSRT

    BOSChargerSRT Full Access Member

    Messages:
    559
    Likes Received:
    0
    Joined:
    Feb 29, 2008
    Location:
    Boston
    Finally almost done! Just need to redo the driver side rockers and ordered to SE black mirrors to change out my painted covers.

    here are the pix...
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  6. SRTLUVR

    SRTLUVR Detailing "Go-to" Guy

    Messages:
    3,018
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    Birmingham, AL
    OOOOOOOOOOOOOOOOOOOOOOHHH MY GAAAAAAAAAAAAAAAAAAAAAWD!!!!!!!!!!!!!!!!!!! Jimmy, Jimmy, Jimmy my man........THAT IS COMPLETELY DEAD SEXY!!!!! I seriously can't stop looking at it......Honestly??? Baddest silver Charger I know. No bullshit. I mean holy freakin hell, that COMPLETELY CHANGED the demographic of your car!!!!!!!!!!! I'm in love dude, for real. :rockon: :rockon: :rockon:
     
  7. NetNathan

    NetNathan Not the Momma

    Messages:
    1,790
    Likes Received:
    0
    Joined:
    Nov 9, 2007
    Location:
    Corona, CA
    Real nice look.
    The rockers really finish it off.
     
  8. Dookie

    Dookie Foe twenny sics

    Messages:
    2,884
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    Baton Rouge, Louisiana
    :worthy::worthy::worthy::worthy:
     
  9. BOSChargerSRT

    BOSChargerSRT Full Access Member

    Messages:
    559
    Likes Received:
    0
    Joined:
    Feb 29, 2008
    Location:
    Boston
    Thanks fellas! Much appreciated!!!
     
  10. BOSChargerSRT

    BOSChargerSRT Full Access Member

    Messages:
    559
    Likes Received:
    0
    Joined:
    Feb 29, 2008
    Location:
    Boston
    New pix...
    [​IMG]
    If you noticed, didn't want the chicken wire and wanted something to match the honeycomb crosshair and found a match. It black plastic, honeycomb design and it's a perfect match.
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  11. BOSChargerSRT

    BOSChargerSRT Full Access Member

    Messages:
    559
    Likes Received:
    0
    Joined:
    Feb 29, 2008
    Location:
    Boston
    I've been asked To remove my front fender emblems. A couple of friends feel that it's out of place, so I took them off. Have pix up soon as I get over this freaken cold.

    Then next mod idea.....lol
     
  12. SRTLUVR

    SRTLUVR Detailing "Go-to" Guy

    Messages:
    3,018
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    Birmingham, AL
    Flat out beautiful bro. And I like their idea to remove the front fender emblems, it'll clean it up a bit. Good call (pax side is crooked anyway, lol). What's the next mod Jimmy?? And hey, did you see my thread about the CBD trunk?? I'd like your opinion, homo.....
     
  13. BOSChargerSRT

    BOSChargerSRT Full Access Member

    Messages:
    559
    Likes Received:
    0
    Joined:
    Feb 29, 2008
    Location:
    Boston
    Chase, thanks bra! Well I've been sick, but still took off the fender emblems and will take pix when feeling better. I also took off the grill emblem, because it wasn't visible in titanium and out one of the fender emblems instead. It looks much better and stands out more.

    As for next mods......hmmmmm.... I wanted to keep a secret, but I'll tell you guys only. Remember my transparent carbon paint I did for the tails? Well I had to redo them, since I got pulled over. Even though they were clearly transparent enough, bastards! I'm going to do similar base paint to an 09 tail, paint the inner circles perimeter body color and tint the reverse and base of circles. As a test, I'm taking bright silver metallic vinyl and running along the bottom of the decklid. Matching the lines from the bottom of the tails, so it's a straight flow across. I'm also going to flat black vinyl wrap some of the lower fascia. Not sure exactly what, but I will try different accents. Also planning on getting Dankos SRT chin spoiler and will wrap that to match as well. Then the interior again and fatmat roof (entire car will be done). Then start changing the headliner and fugly 2tone interior with............ Sorry wont say yet. It's a surprise.
     
  14. SRTLUVR

    SRTLUVR Detailing "Go-to" Guy

    Messages:
    3,018
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    Birmingham, AL
    Geezus pimp. That's a shitload lol.....
    I think what you have wrapped right now on the car is PLENTY. Just be careful to not over-do it bro. Like the idea on te tails also. I'm glad we don't have those laws in Alabama. My tails are dark as hell on all three rides lol.
     
  15. BOSChargerSRT

    BOSChargerSRT Full Access Member

    Messages:
    559
    Likes Received:
    0
    Joined:
    Feb 29, 2008
    Location:
    Boston
    Yeah, thought about additional wrapping and decided already not too. I'll just add the danko chin spoiler and that will be enough, since it wraps fully around the bottom of the fascia.
     
  16. BOSChargerSRT

    BOSChargerSRT Full Access Member

    Messages:
    559
    Likes Received:
    0
    Joined:
    Feb 29, 2008
    Location:
    Boston
    New pix with Gabe and Jim's (JackieSRT) suggestion to remove SRT8 fender badge.
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    What you think?
     
  17. SRTLUVR

    SRTLUVR Detailing "Go-to" Guy

    Messages:
    3,018
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    Birmingham, AL
    MUCH better Jimmy. Agreed. Debadge did the trick on this one!!! :D
     
  18. BOSChargerSRT

    BOSChargerSRT Full Access Member

    Messages:
    559
    Likes Received:
    0
    Joined:
    Feb 29, 2008
    Location:
    Boston
    Thanks Chase! Just took off the mirror covers to test out Plasti-Dip tomorrow. If it holds well, I'll do the pockets on my Maggie and chally wheels.