Per Stu: This is a cam only comparison. The car is a Dodge Charger R/T and this is the first A:B cam (both tuned) only dyno that I have seen with the crazy jay. As you can see the peak gains are only like 45/40 and the peak HP numbers of 325 HP aren't mind boggling for a cam only car dyno, but check out the TQ gains in the 3500-3700 range. It's picking up almost 60 lb-ft of torque and everywhere the HP/TQ gains are up big time so it pretty much raised the entire curve up with HP being between 30 and 45 better and the TQ being 40-60 better. The big torque gains on the bottom end will work well getting heavier trucks and the heavy LX cars out of the hole and it's also right where the recovery RPMs are on the gear changes so this should be a strong performer for a small MDS compatible cam.
Just found out from the guy that did the tuning that the baseline was a different stock car so the A:B isn't a true A:B and the shorties, high flow cats and cai will definately make the car put some better numbers down than the baseline we have.