Cleaning the Front hood emblem

[Immo]

What can I use to clean my Front hood emblem? It has some white spots on it...

 

[LegMaker]

what kind of emblem do you have??? stock or something from bt??? anykind of cleaner should work, then follow with a soft detail brush to get in the cracks and crevices.....

 

[Immo]

I thought I would share this too:

Sticky from another forum..

Hi folks.



I thought I would sticky this up for overall general care of your billet products.



If you have just satin finishes; a couple of times a month for your interior products just take a fine microfiber cloth and apply a bit of WD40 to the cloth and wipe your pieces down lightly to the grain of the tool path. This will keep your pieces looking good.



If you have satin under the hood you can do the same thing as with your interior parts lightly apply some WD40 to the parts or a fine microfiber cloth and wipe them down to the grain of the tool path. Under the hood pieces you should check on them at least once a week to keep them clean and looking brand new



For those of you with bright dip anodize under the hood or color anodize under the hood PLEASE only wipe your parts down with a soft microfiber cloth as needed. You can use a light spray of non-streak windex or any similar product to keep them clean. On any anodzied under the hood products; DO NOT USE ANY ABRASHIVE CLEANERS OR CHEMICALS. This will strip the anodize from your parts and cause discoloration. Please if you have a professional detail your car, please tell your detailer to not use any degreaser or solvants. Again this will strip the anodize and ruin your finish. The whole purpose of anodize bright dip or colors is to provide the protection on the parts so that you only need to wipe them clean with a cloth and nothing more.



__________________