GAUGES All gauges receive battery current through the EMIC circuitry only when the ignition switch is in the On or Start positions. With the...
Hi At first I lost the ability to enter the EVIC to change language, so I took off the cable to the battery for a few minutes, then put it back...
pic hope it goes well
Hi Need color code for the wire,driver side, reverse auto tilt. Thanks
Thanks Quick
Hi Does anyone have the instructions to program a 3rd key, if I have the first two programed. Thanks
From a kind reader on another forum, this is definetly not a home fix According to the manual: U0141 Possible Causes: CAN B BUS CIRCUITS...
Got these codes from my scan U0141–LOST COMMUNICATION WITH FRONT CONTROL MODULE. . . . . . U0103-LOST COMMUNICATION WITH ELECTRIC GEAR SHIFT...
one week an no problems, turned out it was the extra heater unit in the fuse box, none were blown but once they were pulled # 1,2 an 3 the drain...
Well the problem was solved, we removed all fuses one by one till we found the source it was the extra heater, although we did nothing, pulling...
Hi A while back I modified both my side view mirrors, added a OEM mirror with turn indicator an added a outside signal indicator on the body,...
OMG 200 dollars a CD!!!!! only one subject per cd
Hi Now this wierd, been sitting all day an only draws 0.009 amps (normal) as opposed to 0.8 amps before pully the above fuses, ill let the car...
My baterry was draing to the point every three days it needed a jump if not used the mechaniic narrowed it down to this, can anyone shed light on...
Hi Good news they found the drain fault by tracking it down using the fuse pull method, will know what it was Monday:)
Where is the CAN BUS?
shall I switch out the cam bus on the radio for grins, do you think its the guts of the key fob I have at the ignition,this is to trick the remote...
ETC is electronic throttle control its located under the turbo
Well today they hooked upthe battery to the tester an it shows the same drop so switching out the remote did not change, took out all the fuses...
Would not chrysler have seen I had a bad ETC when they did the scan al they got was 44 error codes for the CAN BUS disturbance, hope the wek they...
Separate names with a comma.