Separate names with a comma.
I'd have to say the language in this thread has slid into the gutter. Definitely not safe for work.
Man I was looking at that PPP car launch at the track. I'm amazed it got an 11.8. The launch looked like they were on their way to a 15 second...
Also, a .085" jet is nowhere near a 260 shot, haha.
Somebody needs to come to the market with an affordable plug and play 90mm throttle body. Our current TB is way too small to feed this kind of engine.
You know, lots of people trade their vehicles right after they get them perfect. I guess Wade's not done perfecting the Cherokee yet, LOL. Glad...
Same place I welded my O2 bung. Looks good.
Welcome to the club!
That's OK, they used to say that when the LS1s first came out. I was first to the 12s with an automatic, first to 11s on motor, and now if you...
Those are excellent times. Very similar weather too. Your headers are really making some power. I hope to have those kind of gains when I add them...
If you get knock retard, your computer will add lots of fuel to compensate. Unless you have less timing than stock, you're probably getting plenty...
About being the key word here. If you check it for yourself, you'll see that the Jeep stall speed is really closer to 3000 rpm. But don't take my...
Easy way to check. Put your vehicle in autostick and select 2nd gear at a dead stop. Stomp on the throttle and look at the rpm. For the Jeeps,...
At launch, my timing is 17 degrees, then it climbs to 20 degrees, then drops to 19 degrees at peak torque, then climbs to 20 degrees at peak...
When Frank Racing swapped my 3,000 mile stock intake manifold with their ported unit, they mentioned that my stocker was coated with oil inside....
That's the great thing about e-mail. James can send you the tune for the cam via e-mail. You can then log your vehicle with the Predator. If you...
Probably 10 rwhp in the higher rpm ranges. The cam is what brought the big gains in low and mid-range torque.
Prep? Drive around the water box. No dry hops. Stage, bring rpm up just above idle (like 1200 rpm), floor it at the last yellow, and keep it...
The tune depends on how much James needs to do. His typical rate is $150 an hour, but he cut me a sweetheart deal since he was wanting to perfect...
The cam is very affordable, especially if you are a do-it-yourselfer. But even if you're not, the FRI labor rates are very fair. This is a much...
Looks super clean Wade. Like the braided lines.
