I'm running a 5.7 manual truck pcm from hotwireauto. I currently have inertia trying to tuning the pcm for the heads and cam upgrade.The Heads and...
I recently purchase and install the Innovate Motorsports 3802 - Innovate Analog Air/Fuel Ratio Gauge with LC-1 Kits. I'm monitoring the AFR and my...
Thank up just making sure everything is good to go when I get problems I always doubt my work but with this information i'm sure i'm good
Question Does it make a difference? The timing chain has two links that are blue and one link on the other side of the chain that is blue does it...
It's the stock tank. I have a 66 belvedere the original tank had a lot of rust so i replaced it with a new tank this was way before the engine...
Yes i can I going to try this thank you great ideas i didn't think about this. People today i found out i still have a problem now while idling it...
Thanks everyone I replace the fuel line with the Aeroquip Performance Hose and now pressure is steady at 60 psi. I still thinking going to get the...
Engine mods ported/polished heads, intake, inertia srt max cam, sop underdrive pulley, long tube headers, inertia tune my pcm. Sent a couple data...
I have a restomod and I know with our engine it requires 60 psi to function well I have been having fuel issues for a while now so my solution is...
How r u doing everyone I have a restomod and have ran this car several time my question is how fast does a stock str8 run? Im talking top speed if...
My cam and heads r installed what is the break in time for a cam I have heard 10 min 1500 to 2000 rpm and 30min its a inertia srt max any help is...
What is the best way to get in contact with u? I called the office number list below ur name and didn't get anything .
This weekend I accomplished a lot I torn down the engine to send my heads to inertia to have them ported and polished. Well during this process I...
New upgrades for my 6.1 I have an inertia cam and inertia performance heads. My question is do I upgrade the timing chain or don't I notices...
The fuel pump is a mallory inline fuel pump fuel flow rate 211 lph / max pressure 60psi / 55gph/ part # MAA-4193FI after the fuel pump I have a...
Still having problems the latest update I just finished changing the fuel pump the see what happen. When I first started having problems it was at...
Everyone input has been a great help I have managed to clear several codes the only one I can't clear is the AIT. Some of the other codes come...
This information is really helping out alot b/c the last component I changed was the intake I recently had it ported and polished. this explain...
Engine 6.1 hemi, year 2006, mods cold air intake/ slp underdrive pulley/ inertia ported and polished intake/ long tube headers/ three speed 727...
U0155 P0463 fuel level sensor circuit high voltage. P0443 EVAP purge solenoid valve 1 control CKT P0517 P0073 P0058 HO2S heater circuit high...
Separate names with a comma.
