Guys here are some pictures. Dan is writing up the details on all options prices and when the first delivery will take place. Shown are polished and brushed with clear anodize. We will also offer blue, red, black and purple, and if you want we will cutom engrave on them for you as well. The braided line is going to be an option for you too. We are manufacturing our own fittings. The fittings you see on the braided line and the braided line are courtesy of the Hemi Shop. Dan will be back in this thread to give you all the details on this within the next few days.
Dan's response: These are our new few rails as Heidi has stated. Machined specificly for Hemi engines. The first sets are going on several testers and will be run early next week. We will be machining the fuel quick connect fitting out of stainless steel for durability (billet shown) there is a nice spot milled to put wrench on it. Clamps are going to mount right where the stock ones mount. we have two styles we're working on and we will leave it up to a vote which ones get produced. Options are endless as to what configuration you want to run. Some will be using double crossovers we are working on prices for black fuel line and also braided hose. Nitrous guys have the options of tapping the end caps to feed fuel from the front of the rail. Other options include plugged threads for fuel pressure gauge or schrader valve. Standard colors will be black,red,blue,(Polished and ultra satin shown.) We are also going to make different size clamps or those of you that want to run the larger injectors with 2 or three standard lengths depending on the applications. These are large volume rails that can supply over 1000 horsepower motors without fuel starvation.
So the braided lines are back on now? Sweet... bout time Lol! Let me know as soon as you are up and running with them. I guess you have a new hose person now?
wow dan/heidi those are some nice friggin pieces!!!!! ahhhh something else to think about when i finally powder coat the intake!!! lol
We will be sietting up a group buy. People can put their name on this list and a small deposit and we will make them to order after the gb is over.Can I count you in for Blue?
Not sure if I want blue or not? hmmmm damn you Dan. Decisions, at my age? WTF? lol Yes, that is SSRT.
thanks Hal, We have completed our Iso audit and now its time to getback to work. I did manage to get a pressure test fixture made to test these rails before you put them on your motor. Pics coming soon
New pressure test fixture has been tested rails work.Gb coming soon Dont mind the gage I stole it off a compression testor
How do these rails mount? We used a fuel rail from CPR for a mock up on our custom sheet metal intake, but we have had nothing but problems with this Vendor and we are returning all CPR products :guns::guns: Your polished rails would look nice as we are using an 84lb injector. But how do the mount????
Sick motor Brian Our clamps are basicly going over the top of the rail kinda like a strap and will bolt thru the stock holes. So yes they should work as is or with little modification. How much taller are your injectors compared to stock?
