I forgot to measure the stock height of my fenders before I installed bags. Can someone with an MSRT running stock wheels/tires (245/45/20 front 255/45/20 rear), measure the height of the top of their fenders (front and rear) for me? Thanks!
Nah, not really exact. I just wanna figure out what pressure to put in my bags for stock ride height so I can postpone an alignment until after SF
2006 Magnum I have 255/45/20 Nitto NT05s on all 4 corners. Measured from ground straight up over the center caps to fender/well lip. 29.75" rear 29.50" front let's see here. 255/45/20 == 29.04" 245/45/20 == 28.68" difference == 0.36" So you might adjust the fronts to 29.2"? Magnums came both ways you know. Either with 245/45/20 RSAs all the way around or the F1s with a stagger and 255/45/20 on the rear. Mine seems to sit lower than other ones I've seen. The specs for ride height are: Front: min/max 13.5"/14.3" -- measured from the frame rail just back of the engine cradle rear mount to the floor Rear: min/max 11.7"/12.5" -- (haha) from the travel limiter attached to the front rear crossmember mount bushing to the floor hmmm, service manual has it lower (above numbers were from a hunter print out): Front: 12.64" +/- 0.47" Rear: 11.42" +/- 0.47" wonder what's up with that?
