If you haven't seen these AeroForce Interceptor scanning gauges, you have to check these out. It's basically a plug-n-play gauge that connects to your OBD2 port and reads virtually everything your computer does, and then displays all those diagnostics onto a split-screen gauge. Here are some pics of the gauges: The gauges come with a white or black face, and you can choose the user-selectable blue, red, green or white display! All the details are here: http://www.speedlogixstore.com/product_p/cncx01.htm but below is some of the highlights ... The Interceptor scan gauge for Chrysler CAN bus vehicles is capable of displaying over 100 parameters, two at a time, at an adjustable rate of up to approximately 20 times per second. If the vehicle is broadcasting the parameter, the Interceptor will recognize this and make it available for display. Here is a sample of the diagnostics you can view on the gauge: * RPM * MPH * Intake Air Temperature (post Intercooler) * Ambient Air Temperature (pre Intercooler) * Engine Coolant Temperature * Exhaust Gas Temperature (PCM Calculated) * Transmission Temp. (auto trans) * Manifold Pressure (vacuum/boost) displayed in PSI * Fuel Temperature * Battery Voltage * Battery Temp * Injector Pulse Width in msec. * Injector Duty Cycle (%) * Air Flow Rate into engine * Long Term Fuel Trim * Short Term Fuel Trim * O2 Sensor Voltage * Barometric Pressure * Ignition Advance * Base Spark * PCM Spark Adjust * Fuel Status (open/closed loop) * Wastegate Solenoid Duty Cycle (%) * Knock Retard * Knock Sensor Raw Voltage * Throttle Position Percentage * Throttle Position Sensor Raw Volts * Calculated Net Horsepower * Engine Load * Transmission Slip * Current Transmission Gear * Torque Delivered to Transmission * Torque Converter lockup status * Brake pressure * Brake Booster Travel * Steering Angle * Non-driven Wheel Speed * Lateral G's * Yaw * Fuel economy (instantaneous and average) * P-ratio - pressure ratio MAP/Barometer We're running a special for free shipping in July and you can order here: http://www.speedlogixstore.com/product_p/cncx01.htm Thanks! Lisa.
I installed one of these yesterday and it is SO AWESOME! I am amazed by everything it reads and after one day of driving, I can't imagine ever being without this gauge!!
I have the black and blue one on the right. It's awesome. I always feel a little stressed when I have to unplug it to datalog with the predator. Chris is right, I can't imagine driving without it now.
We have tested the Aeroforce Scan Guages on the new 2011 392, and confirm that it is fully functional. So these will work on 05-11 5.7, 6.1, and 6.1L Hemi Cars. Here is a pic in the 392
