Thought this would be cool for some of your sigs if you like:rockon: Using the "honor system" and the guidelines below, each member will select which badge(s) applies to them: For example: If you ran a 1/8 mile in 8.2 seconds, then you would select the "In the 8 Second range" below. If you ran a 1/4 mile in 14.6 seconds, then you would select the "In the 14 Second range". Follow these instructions exactly: 1. With your left mouse button, highlight the line to the right of the appropriate Merit Badge below starting with . 2. Then right mouse click on that line and select Copy, or hit Ctrl and C on your keyboard. 3. Then go to your Personal Zone, Profile, and select View/Edit Complete Profile. 4. Then go down to Signature:. To keep everything uniform, it is requested that you please place any and all Merit Badges at the very end of your signature line as follows: ---- Scroll down to the very end of the last entry in your signature block and place your mouse cursor there. Then hit the Enter key once or twice to make sure there is one line of space. Then right click and select Paste or select Ctrl and V on your keyboard to insert the line you copied. If you add more than one Merit Badge, simply paste each one right after the other (no space required). 5. IMPORTANT!: You must then delete the space between the two forward slashes in http:/ / so that it reads http:// 6. Select Submit at the bottom to apply your Badge. ____________________ 1/8 MILE TRACK TIMES In the 7 Second range: In the 8 Second range: In the 9 Second range: In the 10 Second range: 1/4 MILE TRACK TIMES In the 10 Second range: In the 11 Second range: In the 12 Second range: In the 13 Second range: In the 14 Second range: In the 15 Second range: In the 16 Second range: ____________________ Remember, you must delete the space between the forward slashes. As more Merit Badges become available, they will be posted here.
Put the comands next to each other... Example: [ULR/]howdoiputthesenexttoeachother.com[ULR] [ULR/]howdoiputthesenexttoeachother.com[ULR]
