I had an Edge Racing 3600 stall converter installed by Bob at SVS and pulled the front passenger and rear passenger seats. 571' DA, first run of the day and I now need a roll cage !!! 1.59 60' . I am going to SacramentoRaceway (where they don't need no stinking roll cages) this Saturday and think I can hit 11.3x with good DA and traction. Not too shabby for a lowly heads/cam, stock block SRT8
You gotta be shittin me!!!? There's guys with 426's hittin that......this HAS TO BE a stock block N/A record......
I was expecting it to be bad and my expectations were all wrong. It revs a little more at low speeds but I really forgot about it after the first day. I'd highly recommend it unless you drive for hours in stop and go traffic all day on hills. Plus $500 without a core charge is a DEAL!!!!!
Here is a video of a 1.58 60' launch. I got off the gas at the 1/8th mile so I would break 11.50. I guess the proper way is to wait til the 1000' mark. http://www.youtube.com/watch?v=o0dDTZrnR1Y
You need to go to Atco. You'd probably be in the 10's. They ran on the 2nd and their DA was like a minus 900. It's going to get even lower. They get over minus 2000 there.
It's like getting a small supercharger Every once in a while we get a perfect DA storm here at Sacramento Raceway but problem is you never know when it will be and it is so damp during the winter that traction sucks. It's like getting a small supercharger Every once in a while we get a perfect DA storm here at Sacramento Raceway but problem is you never know when it will be and it is so damp during the winter that traction sucks. Here is a vid of a 11.507@114MPH run. I spun a little on the launch and let off just shy of the quarter mile mark so I wouldn't go under 11.50. BTW the camera guy was wrong on the ET http://www.youtube.com/watch?v=fKKaai1s3fc
