426 Inertia Stroker w/ Vortech V3 S/C, Suggestions needed to finish!

Sorry steve I still think that front radiator your talking about is your heat exchanger. It has water running through it. I dont think you can use that with water to air. if I am wrong then I will be the first to run out and buy one!


Also that 90MM will work fine with boost. It works even better at higher boost levels. thats why KB made a 150MM TB for there units and why the whipple kit has a 92mm inlet. I would keep that 90TB if you change your mind and want to sell it let me know man I am in the market for a nitrous 90mm TB

 

ummmm yeah...... the cars you mention have no choice but to run air/water. centri blowers get the choice!

john, you most def can use a nitrous fogger on the heat exchanger! ralph is using one on one of the two heat exchangers he is running if i am not mistaken. all this is great, but i am still a firm believer in pure physics.... air can fluctuate temps (read cool down) much faster then water....... my air/air set up will be here by weeks end. i am running 160+ intake temps now..... i will report back to everyone what they are with the air/air set up. i am willing to be they are MUCH lower!!! i am not arguing that air/water set ups can be used with systems running lots of power, but just think how much more power might be there if the intake temps were lower.......

 

Can these parts be used w/ Vortech?

Can any of the parts be used on my Vortech Unit? They are from my 392" Hemi GSM Kit leftover from my Hemi Ram with other parts like the Vortech Blow Off Valve?

 

I dont see why you wouldnt be able to use the BOV

 

The heat exchanger in your new kit is much better than the GSM one so you will not want to use that. the BOV you have there is a nicer one than comes in the kit 9 (but you would have to cut it off whatever it is mounted to in that pic to use it), not 'needed' unless you plan on over 8 psi, but that is the only part that you 'could' use that would be better than what you have in the Vortech kit.

 

Thanks, Thats what I thought, the BOV was $200.00 years ago!

 

I am just gonna copy big Chris and getting the same BOV that he uses

 

well that should work! the one in the picture sure made some noise!