Ported Throttle Bodies, Great Mod!

We're doing 85mm ported throttle bodies (or as close to as possible)!
I have this one on my car and really like it. It gained 5hp and 5tq at the Diablosport dyno.
You get much better engine response also.

http://moesperformance.com/index.php?main_page=product_info&cPath=1280_1286_1440&products_id=12118

 

Nice unit. I wonder what kind of gain it would do on a highly modified 426?

 

I'd like to know that myself!

 

I just sold my 90mm tb. But it was good for 15hp and 15tq on my 426

 

We have my stock Throttle body from my Challenger R/T. It's got 1,000 miles on it and I couldn't sell it as "new". I could discount it to $300 shipped if anyone's interested?

 

Are you selling a used OEM TB with or without porting?

 

It's a slightly used (1,000 miles) ported OEM throttle body for $300 shipped. It's ported to 85mm, or as close as we can get depending on the casting.
It made 5hp/5tq at Diablosport's dyno. I have the dyno sheet.

 

We finally got the dynosheet up.

http://moesperformance.com/index.php?main_page=product_info&cPath=1280_1286_1440&products_id=12118

 

Any chance you'll be offering an 85MM TB with an 85MM blade in the future?

No offense, but are you positive the porting is 85MM and not more like 82MM?




This one measured 84MM if my memory is correct. As you can see, the wall thickness is much thinner than yours, yet your's is a larger diameter. How?

 

We're not gonna make a bigger blade. I don't think it's a good idea.

I edited the first post after I said it was 85mm. One of the following posts I did specify that we port as close to 85mm as possible.
The most recent ones have been between 84-84.25mm.
Some of the castings are inconsistent and we can't get them to 85mm without getting the walls too thin.

 

Bob how much to port my existing throttle body??