BWoody Performance LLC. 27i4 Pulaski Hwy. Suite #3 Edgewood, Md. 21040 Shop- 410-676-1042 fax- 410-676-1042 Here it is our first groupbuy ever on on our Cold Air Intake system for the Jeep Grand Cherokee SRT-8!! Fits 2006 through 2009 Jeep Grand Cherokee 6.1L and 5.7L The IAT sensor was moved another 12" downstream to read even cooler air, a plug and play IAT extension is included at no extra charge with the purchase of a 4" BWoody CAI. Track results have shown very little results from the 3 1/2" to 4" BWoody Jeep SRT-8 using the OEM 80mm Throttle Body, Largest gains will be achieved with the 90mm throttle body. Flowbench results: *Results as follows at 28" of water: *oem intake w/oem filter = 799.5 cfm *oem intake w/K&N drop in = 815.7 cfm *4" BWoody CAI = 1147.6 cfm *Flowbench results showed a whopping 348.1 cfm increase over the OEM airbox!! Dyno results: Our intake was tested against the OEM intake and gained a wopping 18.7 WHP! Couplers for the OEM throttle Body and the 90mm Arrington Throttle Body are available at no extra cost in the check out comments section please choose either one, default coupler will be for the OEM throttle Body if you do not make a selection. Color shown is Anodized red with a black silicone coupler Standard colors are silver and wrinkle black, silicone couplers are black. If you wish to have a custom color please choose in the drop down boxes below. If you don't see the color you want please contact us we have over 150 colors instock. colors on actual parts can be found here: http://www.srtforums.com/forums/showthread.php?t=334805 Price: $289.99 any color shipped= Free shipping to the lower 48 states only please pm me for shipping elsewhere. Our Paypal address is: [email protected] For credit card orders please call the shop at 410-676-1042 between 10-8 m-f 10-6 sat. Please do not forget to include your forums screen name and color choice and wether you want an 80mm coupler for the stock throttle body or a 90mm coupler for the Arrington throttle body in the paypal notes. ***YOU WILL NOT BE ADDED TO THE LIST UNTIL YOUR PAYMENT HAS BEEN RECIEVED*** powder coating Colors available: wrinkle black (single stage) silver (single stage) extreme chrome (single stage) lime green (single stage) bright red (single stage) yellow (single stage) white (single stage) mopar orange (single stage) neon pink (single stage) pastel pink (single stage) Chevy Orange (single stage) hotrod black (single stage) midnite blue wrinkle (single stage) mopar blue (single stage) stamped steel (single stage) flat black (single stage) off white (single stage) gold (single stage) bronze (single stage) med denim blue (single stage) platinum (single stage) gray metallic (single stage) rally wheel silver (single stage) black w/copper vein (2 stage) black w/silver vein (2 stage) super gloss black (2 stage) super gloss yellow (2 stage) super gloss red (2 stage) starlight candy blue (2 stage) anodized candy red (2 stage) anodized candy emerald green (2 stage) anodized violet (2 stage) anodized gold (2 stage) super chrome (2 stage) e-blue (2 stage) candy orange (2 stage) smoke chrome (2 stage) candy copper (2 stage) prismatic black (2 stage) antricite (2 stage) prismatic anodized red (2 stage) denim metalic blue (2 stage) grape flake (2 stage) anodized grape (2 stage) Starlight Candy Red (2stage) iridescent amethyst (2 stage) iridescent indigo (2 stage) ultra metalic silver (2 stage) gun metal (2 stage) Groupbuy Participants: 1. FFSP paid fedex#648238210022299 2. M4M paid fedex#648238210022589 3. 4. 5. 6. 7. 8. 9. 10.
Just picked up my brand new Jeep SRT8 last week and I'm anxious to start the modding! From what I've been reading over on the cherokeesrt8.com forums the Bwoody 4" CAI is the way to go on the Jeep. Paypal payment has been sent! Thanks! Mike
Oh SNAP... Nathan, call me and I will get you in touch with Mike. BWoody is working through some employee changes and has little time to visist the forums.
