changin out ram emblem (front clip magnum)

Discussion in 'How-To/Tech Database' started by $$Rjeezy$$, Sep 30, 2008.

  1. $$Rjeezy$$

    $$Rjeezy$$ Srt-8 Mag

    Messages:
    45
    Likes Received:
    0
    Joined:
    Sep 2, 2008
    Location:
    Houston
    Is this possible? Anyone know how?
     
  2. leepen

    leepen New Member

    Messages:
    473
    Likes Received:
    0
    Joined:
    Aug 31, 2008
    Location:
    Vegas
    on the Neons it was just double sided tape with a post throught the bumper..
     
  3. 1bad4dr

    1bad4dr Mr. Meany

    Messages:
    19,670
    Likes Received:
    0
    Joined:
    Oct 10, 2007
    Location:
    Corn Country
    The front emblem on the Charger had a nut/bolt that held it in place. It was reachable by taking the radiator covers of and reaching under the nose with a wrench. Pretty easy and straight forward.

    The Maggy has it on the center of the cross hairs, correct? Can you see through the back side of the grill if there is a bolt? Maybe do a reach and feel?
     
  4. SRTLUVR

    SRTLUVR Detailing "Go-to" Guy

    Messages:
    3,018
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    Birmingham, AL
    That "reach and feel" comment is gonna bring on a whole kind of shitstorm once the EQ sees it.....lol. :)
    Chase
     
  5. DragginWagon

    DragginWagon Full Access Member

    Messages:
    1,069
    Likes Received:
    0
    Joined:
    Nov 24, 2007
    Location:
    Atlanta, Ga
    its clipped on from the back somehow, take the pins out at the top of the front facia (under the hood) get a flash light and look down while gentally prying the fascia forwards(Basically same way you would take the grill out), that should give you a better veiw of how its clipped in.
     
  6. 1bad4dr

    1bad4dr Mr. Meany

    Messages:
    19,670
    Likes Received:
    0
    Joined:
    Oct 10, 2007
    Location:
    Corn Country
    lol
     
  7. Face77

    Face77 Clear Bra King.

    Messages:
    87
    Likes Received:
    0
    Joined:
    Mar 26, 2008
    Location:
    Sugar Grove, Il
    It's a 1/2" nut (or right about that size...). you have to pry the front end forward, cut your hand a bunch of times getting it in there and just start turning. It's one of those metal nuts that threads on to the plastic shaft of the emblem. Good luck!
     
  8. $$Rjeezy$$

    $$Rjeezy$$ Srt-8 Mag

    Messages:
    45
    Likes Received:
    0
    Joined:
    Sep 2, 2008
    Location:
    Houston
    so i could basically remove the honeycomb grille right? Makes for easier access
     
  9. Cam

    Cam Management up n smoke

    Messages:
    2,693
    Likes Received:
    0
    Joined:
    Nov 15, 2007
    Location:
    Riverside, CA
    No, that requires removing the fascia. Just pop off the two black plastic covers between the fascia and the radiator support. Then unless you got arms the size of arnie, you can reach down and remove the retainer nut that holds it on.
     
  10. $$Rjeezy$$

    $$Rjeezy$$ Srt-8 Mag

    Messages:
    45
    Likes Received:
    0
    Joined:
    Sep 2, 2008
    Location:
    Houston
    thats exactly wut i was thinkin. Ive adjusted the grill before thru here. thanks