Exhaust smell "HELP"

Discussion in 'General Discussion' started by 07norcalsrt8, May 25, 2008.

  1. 07norcalsrt8

    07norcalsrt8 I'm So Screwed

    Messages:
    299
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    South San Francisco Ca
    I have had my JBA exhaust on my SRT for almost 5 months now(what a POS system it is) and the smell of exhaust fumes is getting worse in the car. Today I went for a spirited jaunt on one of my local freeways here in town and the smell of exhaust fumes just got horrid. it only really smells when there is a load on the motor, or close to WOT for a period of time, but today was the worst incident by far. Actually smelled like something was burning, but when I checked nothing was melted. I have a band clamp on the mid pipe to cat-back joint because the clamps from JBA suck. Is there anything short of welding the whole system up that I can do?? Probably s**t the system and get a more quality system, but I need a fix for right now. BTW I never had this smell with the factory Cat-back, only after I replaced it. Thanks all....
     
  2. ChargerGirl

    ChargerGirl Mama / DB Geek / Driver

    Messages:
    7,029
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    Dublin, CA
    Exhaust leak? Especially if you can smell it in the car at speed. Does it sound different, like congested or angry? I had this happen with my zoomers when I just had the clamps on them. Didn't notice a smell though, but it was in the winter.
     
  3. 1fastsedan

    1fastsedan Destroyer of Warranties

    Messages:
    1,933
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    I've never had a problem with my JBA system. It definitely sounds like you have a leak. It shouldn't be a problem to have fixed. Run it by an exhaust shop.
     
  4. LegMaker

    LegMaker LMI - LegMakerIntakes

    Messages:
    10,483
    Likes Received:
    0
    Joined:
    Oct 25, 2007
    Location:
    orlando
    sounds like a leak at the x-pipe to me..... get it welded and be done with it!!!
     
  5. 07norcalsrt8

    07norcalsrt8 I'm So Screwed

    Messages:
    299
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    South San Francisco Ca
    Thats the conclusion I came up with. I am going to replace the JBA set-up I have and fully weld my new Cat-back up. Kinda leaning twards Magnaflow or Bassani or just have and exhaust shop create me a 1 off.......

     
  6. Quick

    Quick Mgmt. - I can't help you

    Messages:
    7,549
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    San Jose, CA
    So what's wrong with Corsa? I have yet to hear a single complaint on the Mopar/Corsa. (Well, maybe the visible resonators).
     
  7. 07norcalsrt8

    07norcalsrt8 I'm So Screwed

    Messages:
    299
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    South San Francisco Ca
    Pricey......:erm:
     
  8. 818SRT8

    818SRT8 New Member

    Messages:
    14
    Likes Received:
    0
    Joined:
    Mar 14, 2008
    Just have them weldit, I have a JBA and love it. Doesn't matter what system you buy a leak is leak. Even if you buy the most expensive exhuast it'll smell the same if it leaks somewhere.