Crazy Jay 112 LSA variant dyno gains

Discussion in 'Inertia Motorsports' started by JarZ, Apr 25, 2008.

  1. JarZ

    JarZ Certified Magnumaniac

    Messages:
    455
    Likes Received:
    0
    Joined:
    Feb 26, 2008
    Location:
    Newark, NJ
    [​IMG]

    [​IMG]



    Per Stu:

    This is a cam only comparison. The car is a Dodge Charger R/T and this is the first A:B cam (both tuned) only dyno that I have seen with the crazy jay. As you can see the peak gains are only like 45/40 and the peak HP numbers of 325 HP aren't mind boggling for a cam only car dyno, but check out the TQ gains in the 3500-3700 range. It's picking up almost 60 lb-ft of torque and everywhere the HP/TQ gains are up big time so it pretty much raised the entire curve up with HP being between 30 and 45 better and the TQ being 40-60 better.

    The big torque gains on the bottom end will work well getting heavier trucks and the heavy LX cars out of the hole and it's also right where the recovery RPMs are on the gear changes so this should be a strong performer for a small MDS compatible cam.
     
  2. 392Stu

    392Stu Supporting Vendor

    Messages:
    104
    Likes Received:
    0
    Joined:
    Dec 9, 2007
    Just found out from the guy that did the tuning that the baseline was a different stock car so the A:B isn't a true A:B and the shorties, high flow cats and cai will definately make the car put some better numbers down than the baseline we have.