brake/rotor install????

How hard is it to install brakes and rotors on the JGCSRT? Is it fairly basic or should I just take it to a shop? I have the GSM rotors and EBC redstuff pads.

 

http://www.300cforums.com/forums/te...-how-installing-low-dust-brake-pads-srt8.html


Remember those rotors are made for left and right side the bigger ones go on front hopefully GSM put directions in there for you if not call them and get them to fax the sheet to you

 

Thanks. Are the rotors easy?

 

Yeah just pull off the caliper and the rotor will slip right off, if you are doing rotors as well as pads you will/should do the pads different then what the link above shows

 

in what way

 

Never mind I just looked at them closer, that is how you have to do them, and then you have to take off the calipers and slide the rotors off

 

in other words if you have never done this before take it in

 

yea ive never done this before my buddy has done it and is gonna help me I just wanted to see if there is anything special with the breaks on these

 

I know the write up is pretty detailed as far as the pads go good luck check in when your done with some pics

 

I got the rotors installed pic are up in a new thread