well...... it's pretty straight forward. I have to admit that it took a couple calls to Ron!! LOL The light is from AutoZone, it has the option to strobe but I didn't wire it that way. I just tired to look it up online and cant find it. I'll go to autozone and get the exact brand. This unit is two pieces, you don't have to disassemble it or anything. There is another write up on here where you take one bar and take it apart and use it. I just found this easier to do. Anyway, the front grill to the air induction scoop pops out pretty easy. Just stick a knife in between it and the hood and easily pry up and it will pop right up and out. With that removed I popped the hood and let the wires fall down the hood. For the lights I used double sided sticky tape to hold them in place. So not much else to it........just basic wiring depending on if you want them to strobe or be solid. I ran one wire to the battery and the others inside to a toggle switch that I mounted under the steering wheel. If you want pics, I can take some and post them up. A little bigger pic.
