Good Shot, Need to get that one on the web site.
Glad it all got their. I did the same cam and heads with a ported intake on a 300C that had a completely stock exhaust system last weekend and it...
I just put one in a local charger and 750 is working good for the idle. That car made 410 rear wheel cam only.
Excellent, looks like the bigger cam works well with the jeep gears.
Good thing, I keep putting them in backwards:) Good job tuning, looks to be making some good numbers for sure.
I like the Spartan Max for the Jeep. 112 will be a strong top end cam if you have a 2800-3000 stall converter. With a stock converter I think...
The cams that use 6.1 springs I normally use a 0.556 or 0.566 lift lobe on but the 6.1 intake will take a 0.580 before you have retainer to seal...
If it a fairly new engine they stay up pretty well. The only one I've ever had fall was an 80K mile engine and I fished it back up with a magnet....
With the Hemi if you will have a bear of a time tuning if the idle is very choppy. We can run a SRT Max on a 112 and it's pretty choppy but will...
I don't think I'd run a spartan on a 110 LSA as it would be tough to tune and probably not run too well up top. Without the converter I'd...
Yeh 30 is going to be tough but with the light car and the manual with a decent OD? An MDS LX can get mid 20's and I'm intending to run MDS with...
My goal, is 10's quarter miles and 30 MPG highway. We'll see how that goes.
More fitment, I'll try and get it cleaned up and shoot some better photos soon. [IMG]
Here is a photo of some tryal fitting of the mockup engine into the bacaruda. [IMG] Orange like Bevo
The color we were going for on the bacaruda was the same metallic copper that is in you neon pic. It turned out a lot more like UT orange though....
I'll get some up this weekend for sure
I just got off the phone with Nathan (Redfox) and explained to him that his original 426 from his maggie was taking up much needed space in my...
An SRT Max on a 110 would have allot of overlap for a stock engine and would be low on cylinder pressre and weak on the bottom end. you would...
An SRT Max on a 112 would be about as choppy as I'd go. The tighter LSA definately will make it choppier, more so than more duration. You would...
You can put a huge cam in a stock 6.1 but to keep the valves from hitting pistons you need to retard it which kills bottom end for that reason...
Separate names with a comma.
