Until the advent of the 392 SRT vehicles coming out, this is what was quoted previously from Chry Co. regarding the SRT line up; "Currently the...
Why didn't you just buy the bottle instead of renting it? I see this as no different than the weld gas bottles I purchased, then all I do is drop...
In the case I mentioned, according to the info I was provided, it runs great on the dyno in WOT, the issue is at idle or just off idle. As soon...
I know who you are speaking of, I made an update post on another forum where you were asking if there was any news, possibly you did not see that....
I have made a couple posts on the topic of tuning for forced induction, and several people have asked for some video of the iEMS3 and my...
Okay, I found the information I was reading, it is from Autoenginuity. Understanding Misfires A misfire is an incomplete combustion event...
I do a lot of work with the O2 sensors, please explain what O2 sims you have, and whether they are on the upstream, downstream, or both. The...
I did some further checking, and I was a little off in the previous statement I made. The ECU can detect even very slight engine speed changes by...
Andy, please feel free to call me anytime (4195732122), it would be good to hear from you, its been awhile. And I was serious about the notes;...
I just read some information on this and I am trying to find it. Apparently an engine has a distinctive harmonics pattern when it is operating....
I have been running turbocharged FI on the 5.7 and 6.1 Hemi's for almost 4 years now. If you allow the combustion chamber temps to go unchecked,...
We use a BOV on turbo's so that it pops open as soon as you come off the throttle, it is held closed by the spring, pulled open by vacuum on the...
It would probably help to provide a discussion of the differences between the older “piggyback†tuners and the iEMS3 which we refer to as...
Separate names with a comma.
