A race to the 1.4's

How many think its possible on a stock suspension? We will be trying this as soon as the track is back open. Our previous best is a 1.51, 1.53, and 1.56. We have a couple of new tricks that we will be utilizing next time at the track and hope to get 1.4x 60ft times, 6.xx 1/8 mile and 10.xx 1/4 mile times.

 

Absolutely possible. Unfortunately, I'm not the right set-up to be that guy.

I might be the 10.xx guy, and maybe even a 6.xx guy, but I just don't have it to do a 1.4x 60 ft.

BTW: On March 22, I'm lining up at the front and pushing Jeremy to the back of the line. that way if we both hit 10.xx, I'll be first!


Bwaaaaa hahahahahahahah!!!!

Also -it may be possible on stock suspension, but it'll be a heck of a lot easier on my suspension.

 

I'll do all of it this year if the tranny, driveshaft, and differential hold.

 

Yea me too, come to think of it there will be quite a few of us in a race for this stuff.

 

I'll let you know next month

 

The other milestone that could fall shortly: 100mph in the 1/8th mile.

 

I wish my motor had been done for the Rumble. Might have eclipsed a couple of them. I'd been running at least a 150 shot. LOL

 

I'll hit the 40's with no N20. I think I already mentioned this in another thread yesterday.

 

I don't launch on bottle. It blows the DR's off.

 

What DR's are you guys rocking??

 

MT ET Street Radial in P315/35R17, wt. 23 pounds.
Footprint: 11.6" wide
Tire diameter: 26.5" tall
Drag wheel is a custom Bogart all aluminum 17x10.8, wt. 17 pounds.
Total package weight: 40 pounds

 

Are they the correct bolt pattern? Will they clear SRT brakes? And lastly . . . If yes to both questions, where can I get some?

 

yes, and Yes, I have much larger brakes then a SRT. They were made specifically for my car and bolt pattern. They are 1 of 2 sets in the country.
Call them up.
http://www.bogartracingwheels.com/

 

What was the cost?

 

1k

 

Wheels and tires? Or just wheels?

 

wheels only

 

They might do them a little cheaper now that they've got the cnc program done.

 

I will call them tomorrow.

Thanks!

 

Why such a heavy wheel? :whistle:

Just kidding. I see your wheels are 10.8" wide. Mine only weigh 15 pounds, but they're only 9" wide.