The numbers are in......dyno numbers that is...

Discussion in 'BFNY Performance' started by Hemi31, Aug 15, 2010.

  1. Hemi31

    Hemi31 [email protected]

    Messages:
    1,731
    Likes Received:
    0
    Joined:
    Nov 7, 2007
    Location:
    AuSable Forks, NY
    The good news is the car did very well......the bad news is I don't have the sheets yet,just a couple of pics.

    The build is an Arrington 426 shortblock,FRI 09' 5.7 heads,FRI 235/247 cam,Stock 6.1 exhaust manifolds,6.1 Intake manifold ported for a 90mm TB.

    The base pull was 487/489
    [​IMG]

    The A/F was pretty damn close and only needed slight tweaking,Mikes tune was almost dead on....not bad for email....we wound up making a few more pulls and got a little gain but not too much.
    [​IMG]

    Gotta thank Mike(lafrad) for the work on the tune and AJ(Hemituner) for finishing up the WOT,and Vinny at VTR for the use of the Dyno. To put this in perspective AJ's 440 made the same HP and 12lbs more torque on this Dyno
     
  2. 1bad4dr

    1bad4dr Mr. Meany

    Messages:
    19,670
    Likes Received:
    0
    Joined:
    Oct 10, 2007
    Location:
    Corn Country
    Pretty damn impressive, Erik.

    Can't wait for you to get to the track...
     
  3. Dookie

    Dookie Foe twenny sics

    Messages:
    2,884
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    Baton Rouge, Louisiana
    He's already been there Ron...pay attention

    Nice number Erik...
     
  4. King Savage

    King Savage Nasty Canasta

    Messages:
    1,318
    Likes Received:
    0
    Joined:
    Feb 2, 2008
    LOL

    Congrats Erik! I watch your race vids all the time :)
     
  5. SRTLUVR

    SRTLUVR Detailing "Go-to" Guy

    Messages:
    3,018
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    Birmingham, AL
    ^^^Not sure what that's all about???

    BUT CONGRATS ERIK!!! Badass dude.....
     
  6. LegMaker

    LegMaker LMI - LegMakerIntakes

    Messages:
    10,483
    Likes Received:
    0
    Joined:
    Oct 25, 2007
    Location:
    orlando
    not sure what dans issue was, but whatever.....

    erik, nice numbers and look forward to seeing your sled in november!!
     
  7. Hemi31

    Hemi31 [email protected]

    Messages:
    1,731
    Likes Received:
    0
    Joined:
    Nov 7, 2007
    Location:
    AuSable Forks, NY
    Well,on a track with no track prep(none,never saw that before) and a not so stellar 60',full weight(4580lbs) and 20" vreds up front.....she went 11.54 N/A! And the Camaro in the other lane....well....I hope I didn't hurt their feelings.
    [​IMG]
     
  8. srt cummins

    srt cummins Full Access Member

    Messages:
    59
    Likes Received:
    0
    Joined:
    Apr 27, 2010
    Location:
    albq
    Why the 5.7 heads? And how high did that make ur compression? Stock transmission
     
  9. Hemi31

    Hemi31 [email protected]

    Messages:
    1,731
    Likes Received:
    0
    Joined:
    Nov 7, 2007
    Location:
    AuSable Forks, NY
    These heads outflow 6.1 heads and the chamber is a better design with better quench. With these heads I have 10.7:1 compression and .033 quench and run 27* of timing with no KR. A 6.1 head would have given me 10.3:1 compression with .080 quench.
     
  10. Hemi31

    Hemi31 [email protected]

    Messages:
    1,731
    Likes Received:
    0
    Joined:
    Nov 7, 2007
    Location:
    AuSable Forks, NY
    Chipping away the PB.....full weight...
    [​IMG]
     
  11. ChargerGirl

    ChargerGirl Mama / DB Geek / Driver

    Messages:
    7,029
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    Dublin, CA
    Nice! :)
     
  12. HalV48

    HalV48 They Call Me Patron

    Messages:
    5,243
    Likes Received:
    0
    Joined:
    Oct 10, 2007
    Location:
    Chandler, Arizona
    Your having way to much fun buddy. Congrats.
     
  13. Dookie

    Dookie Foe twenny sics

    Messages:
    2,884
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    Baton Rouge, Louisiana
    Very nice Erik, how did you gain 2mph?
     
  14. Hemi31

    Hemi31 [email protected]

    Messages:
    1,731
    Likes Received:
    0
    Joined:
    Nov 7, 2007
    Location:
    AuSable Forks, NY
    Tires:D
     
  15. Dookie

    Dookie Foe twenny sics

    Messages:
    2,884
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    Baton Rouge, Louisiana
    Skinnies up front give 2+mph..wow! Never knew that.

    You have any goals in mind, or just wasting fuel for fun.
     
  16. Hemi31

    Hemi31 [email protected]

    Messages:
    1,731
    Likes Received:
    0
    Joined:
    Nov 7, 2007
    Location:
    AuSable Forks, NY
    No....I had 20's up front.50 psi in them, I used a little shorter tire out back just screwing around but I couldn't get traction. I haven't run the skinnies yet. Saving those till I can get the suspension swapped and the sway bars out....if I can get some weight transfer and actually hook the car should run very low 11's.

    Oh....and I usually run high 117's to low 119's anyway.
     
  17. Dookie

    Dookie Foe twenny sics

    Messages:
    2,884
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    Baton Rouge, Louisiana
    Ah, i see...Yea, i noticed your 60' left a lot to be desired. Not bad, but could shave a couple tenths for sure. As is, and better 60', you'll be low 11's. With skinnies, sway delete, and a little weight loss, you may even see some 10's N/A!

    In the not so far future, i plan to be in a better financial situation than I am now, and be able to sink some more coin in my car.
    Here's to living vicariously through friends! :cheers:
     
    Last edited: Oct 18, 2010
  18. Hemi31

    Hemi31 [email protected]

    Messages:
    1,731
    Likes Received:
    0
    Joined:
    Nov 7, 2007
    Location:
    AuSable Forks, NY
    Last edited: Nov 7, 2010
  19. LegMaker

    LegMaker LMI - LegMakerIntakes

    Messages:
    10,483
    Likes Received:
    0
    Joined:
    Oct 25, 2007
    Location:
    orlando
    very nice erik!!!! really getting ready for atco i see!
     
  20. 1FST4DR

    1FST4DR Supporting Vendor

    Messages:
    2,051
    Likes Received:
    0
    Joined:
    Oct 14, 2007
    Location:
    Ft Laud
    Damn bro. SWEET!!