Went to get a base # before I get the PWR heads,cam,ported intake,ud pulley,100mm tb put on next weekend by Erik (BFNY) Right now I have Kooks lt, h/f cats, Borla S, LMI cai, 91 cai canned tune running 93 ostane gas. Bradys High Performance Willow Street, PA <---below Lancaster Dynojet Dyno 373.4 hp/ 378.45 tq 69 degrees, 29.89 in-Hg, 15% humidity Dont know if its good, bad, or normal for my mods. Ill be going back when everything is installed to get it tuned and will post the new results... __________________
this is jim383 from red site: NO MODS but what you see. so you may be good for a canned and should see a decent bump with the dyno 07 BLACK SRT-8 GC JEEP PREDATOR / CMR Custom Dyno Tune. GSM CAI EVERY THING ELSE IS BONE STOCK. 368 HP - 382 TQ 91 OCTANE STREET TUNE
your numbers sound about right. then again, dyno's are all over the map as to numbers and consistency!! just make sure to use the same dyno again for the "after" numbers!! lol looking forward to seeing the results! btw - are you sure this guy erik knows what he is doing???? hehehehehehe
Mine was on a AW DYNOJET. A lot of guys get theres done on a 2 WH dynojet but never tell what kind of dyno they used. Those are great number if it was a AW DYNOJET but it was a 2WH DYNOJET there not bad as my 06 srt-8 magnum bone stock put out 372 on a 2 WH DYNOJET. I just looked it up they have a 2 WH DYNOJET. Brady's Performance Service LLC Telephone: 717-283-0056 386 Millwood Road Email: Willow Street, PA 17584 Website: Model 224x (This is a 2wh dynojet)
