I too got "SCREWED" by TECHCO, and CTP will come to the rescue...

Discussion in 'Crank This! Performance' started by TechcoCorvette, Sep 29, 2009.

Thread Status:
Not open for further replies.
  1. LegMaker

    LegMaker LMI - LegMakerIntakes

    Messages:
    10,483
    Likes Received:
    0
    Joined:
    Oct 25, 2007
    Location:
    orlando
    johnny on the spot there ron!!! lol
     
  2. CrankThis!

    CrankThis! Supporting Vendor

    Messages:
    295
    Likes Received:
    0
    Joined:
    Nov 14, 2007
    Well I must have gotten really screwed I got a good 8 shirts and a hat, and after 4 months I got a jeep with no engine. lol Engine is at Cam's now, I got lucky, but CAM is an absolute genius when it comes to building bad ass cars, your in good hands. I have a feeling the techco logo on my blower is getting replace by CTP.
     
  3. Cam

    Cam Management up n smoke

    Messages:
    2,693
    Likes Received:
    0
    Joined:
    Nov 15, 2007
    Location:
    Riverside, CA
     
  4. NYCSRTATE

    NYCSRTATE Maximus Want 2 Go Fastius

    Messages:
    2,590
    Likes Received:
    0
    Joined:
    Nov 10, 2007
    Location:
    City Thats Never Sleeps
    Im so glad I stayed the HELL away form that screw, no pun intended.

    Sorry to hear about your troubles, I may move to Cali just to be close to Cam and light him up. :)
     
  5. TechcoCorvette

    TechcoCorvette Full Access Member

    Messages:
    82
    Likes Received:
    0
    Joined:
    Sep 29, 2009
     
  6. Hemi31

    Hemi31 [email protected]

    Messages:
    1,731
    Likes Received:
    0
    Joined:
    Nov 7, 2007
    Location:
    AuSable Forks, NY
    Ever see the size of the pipe Cam uses to make the driveshaft loops?;)
     
  7. 1bad4dr

    1bad4dr Mr. Meany

    Messages:
    19,670
    Likes Received:
    0
    Joined:
    Oct 10, 2007
    Location:
    Corn Country
    bwahahahahahahahahahaha
     
  8. TechcoCorvette

    TechcoCorvette Full Access Member

    Messages:
    82
    Likes Received:
    0
    Joined:
    Sep 29, 2009
    Hmmm... I am glad that I will not have to deal with that one. :D

    Thank you. My Techco related troubles (at least operational) will hopefully be gone once Cam is able to work on my car.
     
  9. LegMaker

    LegMaker LMI - LegMakerIntakes

    Messages:
    10,483
    Likes Received:
    0
    Joined:
    Oct 25, 2007
    Location:
    orlando
    even that would not help fill the gapping hole in stevo's backside.....:sick:
     
  10. Cam

    Cam Management up n smoke

    Messages:
    2,693
    Likes Received:
    0
    Joined:
    Nov 15, 2007
    Location:
    Riverside, CA
  11. StevoSRT

    StevoSRT Moderator

    Messages:
    19,139
    Likes Received:
    2
    Joined:
    Nov 6, 2007
  12. TechcoCorvette

    TechcoCorvette Full Access Member

    Messages:
    82
    Likes Received:
    0
    Joined:
    Sep 29, 2009
    Thank you for all of your support guys. Chuck, nice speaking with you this evening. Thank you again for all PM's and responses, as that is very much appreciated.
     
  13. LegMaker

    LegMaker LMI - LegMakerIntakes

    Messages:
    10,483
    Likes Received:
    0
    Joined:
    Oct 25, 2007
    Location:
    orlando
    before you get carried away, run the car and post up a time slip......... then we will see who is slower......;)

    you have run the car before right???? you do know how to drag race or is chris going to drive your car as well as work on it???? :whistle: :ronlove:
     
  14. 1bad4dr

    1bad4dr Mr. Meany

    Messages:
    19,670
    Likes Received:
    0
    Joined:
    Oct 10, 2007
    Location:
    Corn Country
    DOH!!!! hahahahahahahaha
     
  15. TechcoCorvette

    TechcoCorvette Full Access Member

    Messages:
    82
    Likes Received:
    0
    Joined:
    Sep 29, 2009
    Cam, I am literaly "counting" the days until you have time to work on my car and fix my intercooler leak and bleed the cooling system, along with giving the system a clean bill of health. It just pains me to see it sitting in the garage, and me not being able to drive it, especially since I need to be able to daily drive it at and with the rain coming in shortly, there is not much time to enjoy the dry climate. All of a suden, the weekends have become boring while not being able to drive my car. Keep me posted if you have any cencellations or miraculously find some time before mid-November.
     
    Last edited: Oct 5, 2009
  16. StevoSRT

    StevoSRT Moderator

    Messages:
    19,139
    Likes Received:
    2
    Joined:
    Nov 6, 2007
    this coming from the guy who has raced (and reported it) once in the past 320842308 years lol...

    and dont you worry little man...ill get you your timeslip ;)
     
  17. TechcoCorvette

    TechcoCorvette Full Access Member

    Messages:
    82
    Likes Received:
    0
    Joined:
    Sep 29, 2009
    This entire issue with TECHCO is "BEYOND" belief and frustration. The ONLY reason that I went with them is becasue they were the only facility and manufacturer that were willing to back up in writting and 100% match my GM powertrain warranty. Fitting the system under the stock hood and being a twin screw blower also swayed my decision. In fact, they even extended this from the date and mileage from when I brought my car to their facility. With them going under, the WORST part of it all, is that no other shop or person has ever installed these in a Corvette, and NONE have replacement parts, such as the ones now needed to correct this intercooler leak. I have left numerous messages for John Spruill (VP of Engineering), and even thought he no longer works for them, he does not have the common courtesy to call me back to even offer some insight. This would just be a kind act from one human being to another.

    PS: Cam, I have not been able to reach you via PM's or e-mails, but Chuck also told me that he has not heard back from you. Unless that you have some free time that comes up, I will see you on 11/13 - 11/14.

    I apologize for the additional ranting, maybe it is the early flu bug that hit me.
     
  18. Cam

    Cam Management up n smoke

    Messages:
    2,693
    Likes Received:
    0
    Joined:
    Nov 15, 2007
    Location:
    Riverside, CA
    Sorry James, I've been a busy sumbitch lately and every now and again, it's nice to just take a fn break from business and just play for 5 minutes. That's about all the time I got now a days. Nothing has changed bud, I'm still booked beyond belief until after SEMA at this time. Tomorrow I'll see where your email ended up and answer it. TTL, Cam.
     
  19. TechcoCorvette

    TechcoCorvette Full Access Member

    Messages:
    82
    Likes Received:
    0
    Joined:
    Sep 29, 2009
    Thank you sir, you are my ONLY hope. The most important e-mail was sent on 09/25 at 11:12 A.M regarding scheduling and availability. I can make myself available ANY Friday-Sunday, except for 10/24, which is my mom's B-Day. This would allow us two full days, if necessary, which is highly doubtfull that this much time will be necessary. I would even be willing to drop the car off with you, and you work on it at your own pace, without me there waiting for it. It is a horrble feeling to be dependent upon one and only person, but you are it man. :worthy:
     
  20. LegMaker

    LegMaker LMI - LegMakerIntakes

    Messages:
    10,483
    Likes Received:
    0
    Joined:
    Oct 25, 2007
    Location:
    orlando
    i don't report things because i do not have time...... too busy working on my own car and then running down the 1320 myself as well!! :whistle:

    as soon as this got forsaken brutal heat goes away, i wll make sure to post some times up for you to beat!! lol :ronlove:
     
Thread Status:
Not open for further replies.