"unknown" CEL Code

Discussion in 'General Discussion' started by StevoSRT, Sep 12, 2009.

  1. StevoSRT

    StevoSRT Moderator

    Messages:
    19,139
    Likes Received:
    2
    Joined:
    Nov 6, 2007
    I got a CEL today and the code read "unknown" on the predator.

    Anyone know what "P013A is and what I need to do to fix it? lol
     
  2. HalV48

    HalV48 They Call Me Patron

    Messages:
    5,243
    Likes Received:
    0
    Joined:
    Oct 10, 2007
    Location:
    Chandler, Arizona
    P013a O2 Sensor 1/2 Slow Response - Rich To Lean
     
  3. StevoSRT

    StevoSRT Moderator

    Messages:
    19,139
    Likes Received:
    2
    Joined:
    Nov 6, 2007
    ok so thats the first half haha

    im assuming this is cause of the non-foulers i put on haha....
     
  4. HalV48

    HalV48 They Call Me Patron

    Messages:
    5,243
    Likes Received:
    0
    Joined:
    Oct 10, 2007
    Location:
    Chandler, Arizona
    Not a clue, just a good googler.
     
  5. StevoSRT

    StevoSRT Moderator

    Messages:
    19,139
    Likes Received:
    2
    Joined:
    Nov 6, 2007
    lol thanks hal
     
  6. Quick

    Quick Mgmt. - I can't help you

    Messages:
    7,549
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    San Jose, CA
    Very likely. Why not just turn them off now that you got your stamp? or did you update to a predator CROM that doesn't do that any more?
     
  7. StevoSRT

    StevoSRT Moderator

    Messages:
    19,139
    Likes Received:
    2
    Joined:
    Nov 6, 2007
    Cause in a year when i have to get that little stamp again....im gonna have the same problem i had this time so now that i have 12 months to fix it instead of being passed inspection...i want to address it now lol
     
  8. Hemi31

    Hemi31 [email protected]

    Messages:
    1,731
    Likes Received:
    0
    Joined:
    Nov 7, 2007
    Location:
    AuSable Forks, NY
    You put the spacers on the forward 02 sensor:D....Actually if you have that code you might not have drilled the hole large enough in the antifouler.
     
  9. StevoSRT

    StevoSRT Moderator

    Messages:
    19,139
    Likes Received:
    2
    Joined:
    Nov 6, 2007
    I will pull it off and drill it out a little more....i did use the size drill bit you told me to! LOL
     
  10. Hemi31

    Hemi31 [email protected]

    Messages:
    1,731
    Likes Received:
    0
    Joined:
    Nov 7, 2007
    Location:
    AuSable Forks, NY
    Then it's not the hole size.....lol....just look to see if there is air gap around the 02 sensor.If it looks to close open it up a hair.
     
  11. StevoSRT

    StevoSRT Moderator

    Messages:
    19,139
    Likes Received:
    2
    Joined:
    Nov 6, 2007
    will do...

    since this can wait ill do it while im down at chris's doing the blower install...
     
  12. Quick

    Quick Mgmt. - I can't help you

    Messages:
    7,549
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    San Jose, CA
    fixed it.
     
  13. StevoSRT

    StevoSRT Moderator

    Messages:
    19,139
    Likes Received:
    2
    Joined:
    Nov 6, 2007
    then at least i got a year of procrastinating to do!
     
  14. StevoSRT

    StevoSRT Moderator

    Messages:
    19,139
    Likes Received:
    2
    Joined:
    Nov 6, 2007
    Pass first time...a month early...BEYATCH!
     
  15. Quick

    Quick Mgmt. - I can't help you

    Messages:
    7,549
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    San Jose, CA
    dahahahaha, so you drilled out the spacers when you did the blower?
     
  16. StevoSRT

    StevoSRT Moderator

    Messages:
    19,139
    Likes Received:
    2
    Joined:
    Nov 6, 2007
    well i ended up doing it today LOL...but it ended up being the standard Non-Fouler into the pipe....one drilled out half way in the middle, and the third drilled out all the way for the 02 sensor.

    3 on each side did the trick. I had been going back and fourth between 3, 2, and the placement/use of the mid range drilled one for about a month now though. I just dont have time during the day usually to do it. Had 2 days off in a row so i have been going about fixing my car and truck all day today and yesterday. Truck needed new brakes baaaaaaaaaaad.

    I did it today cause i wanted to get it done as soon as i knew it was ready so that if it came back i'd have another year to deal haha. Plus track is tomorrow and you never know whats gonna happen.