Pictures of candy red and black chrome dual CAI systems

Discussion in 'Crank This! Performance' started by Cam, Jul 2, 2009.

  1. Cam

    Cam Management up n smoke

    Messages:
    2,693
    Likes Received:
    0
    Joined:
    Nov 15, 2007
    Location:
    Riverside, CA
    Here are the first two sets out of powder coat. Please excuse that tacky display, but it'll have to do [​IMG]


    Here is the candy red that is an exact match to my system. The color/lighting doesn't make it look like it really looks, but it looks alright. [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    These are the filler plates that go above the filter support to shield it from direct water from up top and stop that nasty, power robbing hot engine air from being sucked into your motor. [​IMG]

    [​IMG]

    [​IMG]

    And now for the infamous black chrome.

    And I suppose your asking why is it infamous??. Well I'll tell ya.

    This will the first and last time I ever do black powder coat on anything. [​IMG]

    I'd imagine that if you caught it at 4:03pm, on the third month of aqueerius, when the sun is lined up in uranus and made sure to guide the little guy down your left pants leg..


    it'd resemble black chrome. [​IMG]

    But it's not working for me. It has the slighest green tint, the color collects in the corners and highlight certain things. Luckly, most of that will never be seen unless your the installer.

    But I need to add for whatever it's worth, I'd run it on my car in a heartbeat with all black fitting, it'd be sick!.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    This here pic is up side down, but cocktails to the first dude that knows what that's fur [​IMG]

    [​IMG]
    [​IMG]
    [​IMG]


    If you have any additional questions please contact me at: [email protected]
     
    Last edited: Sep 2, 2009
  2. 1bad4dr

    1bad4dr Mr. Meany

    Messages:
    19,670
    Likes Received:
    0
    Joined:
    Oct 10, 2007
    Location:
    Corn Country
    They look great Cam.

    My guess is either the AIT Sensor or for a Meth/N2O fitting?
     
  3. Cam

    Cam Management up n smoke

    Messages:
    2,693
    Likes Received:
    0
    Joined:
    Nov 15, 2007
    Location:
    Riverside, CA
    On the red set, the IAT is down on the drivers side right at the bottom.

    The BC set has the IAT close to stock on the bottom of the tube so it doesn't show.

    And that there one might, just could be, MAYBE for a little giggle juice :D
     
  4. Bud

    Bud GG EVO IX MR

    Messages:
    3,949
    Likes Received:
    0
    Joined:
    Oct 14, 2007
    Those are truly works of art Cam!
     
  5. SMosher

    SMosher Silver Supporting Members

    Messages:
    420
    Likes Received:
    0
    Joined:
    Mar 21, 2008
    Location:
    Modesto CA
    WOW Cam ... That looks great!
     
  6. Cam

    Cam Management up n smoke

    Messages:
    2,693
    Likes Received:
    0
    Joined:
    Nov 15, 2007
    Location:
    Riverside, CA
    Thanks Rick!.

    And you to Steve :D
     
  7. FlyByU

    FlyByU Vroom vroom

    Messages:
    726
    Likes Received:
    0
    Joined:
    Dec 1, 2007
    Vroom vroom :)
     
  8. ChargerGirl

    ChargerGirl Mama / DB Geek / Driver

    Messages:
    7,029
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    Dublin, CA
    Ooooh...I need a job!
     
  9. NorCalSRT-8

    NorCalSRT-8 Performance Consultant

    Messages:
    228
    Likes Received:
    0
    Joined:
    Nov 7, 2007
    Location:
    Yuba City, Ca
    Those things are killer! You are such a jerk Cam. Where the hell was mine when I needed one way back when....I hate you! LOL!
     
  10. greatone61

    greatone61 Full Access Member

    Messages:
    875
    Likes Received:
    0
    Joined:
    Dec 31, 2007
    Location:
    Santa Fe
    They look sweet Cam! I see what you said about the Black Chrome but it still looks badass!
     
  11. Mighty Noid

    Mighty Noid Need bigger cam and bette

    Messages:
    992
    Likes Received:
    0
    Joined:
    Nov 10, 2007
    Cam that black chrome might be perfect in a silver steel charger????

    :)

    LOL
     
  12. Cam

    Cam Management up n smoke

    Messages:
    2,693
    Likes Received:
    0
    Joined:
    Nov 15, 2007
    Location:
    Riverside, CA
    :happy:

    Ya, me too

    Hey man, it's never to late. At some point when I'm caught up with a few things. I'll do customs for a small one time nominal fee.

    Thanks Snehal

    ya,ya,ya..it would wouldn't it. :zorro:

    and thanks everyone.
     
  13. HalV48

    HalV48 They Call Me Patron

    Messages:
    5,243
    Likes Received:
    0
    Joined:
    Oct 10, 2007
    Location:
    Chandler, Arizona
    I like the green one Cam.
     
  14. Quick

    Quick Mgmt. - I can't help you

    Messages:
    7,549
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    San Jose, CA
    Awesome looking Cam!


    On that last pic of the red one... that far right clamp is closer to the edge than the other three clamps...
     
  15. Cam

    Cam Management up n smoke

    Messages:
    2,693
    Likes Received:
    0
    Joined:
    Nov 15, 2007
    Location:
    Riverside, CA
    ya//ya//ya.ha.ha.ha. you funny guy


    Thanks Dave!! and FU too!. :ilovesrtc:
     
  16. Quick

    Quick Mgmt. - I can't help you

    Messages:
    7,549
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    San Jose, CA
    What would happen if you ground those welds down perfectly smooth?

    and one thing you haven't mentioned yet. What does it SOUND like?
     
  17. Cam

    Cam Management up n smoke

    Messages:
    2,693
    Likes Received:
    0
    Joined:
    Nov 15, 2007
    Location:
    Riverside, CA
    Which welds ae those??. There are three joints for each tube and they're smoothed inside and out. Not including notching the diameter in three spots so the butt joints match properly. Lotta work in them boys that doesn't show.

    ya know, I don't know, I do know my car is loud as hell getting on it. Maybe we can get Dan to do a before and after vid.
     
  18. SRTLUVR

    SRTLUVR Detailing "Go-to" Guy

    Messages:
    3,018
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    Birmingham, AL
    You're only making it harder for me, Cam......and yes I'm referring to my genitalia......

    Holy hellfire those are beautiful. I'll be knockin on your door soon enough. You fuckin :rockon: dude!!!!
     
  19. Cam

    Cam Management up n smoke

    Messages:
    2,693
    Likes Received:
    0
    Joined:
    Nov 15, 2007
    Location:
    Riverside, CA
    Oh shit Dave, I know what you talking aout. Here's the deal. That's a trade off and granted, it would look a whole lot better with it smoothed. But all the work is done inside to flow the air better. And if I were to grind those welds down, it would make the tube to thin at those joints.

    No bullshit, but in all honesty it is a performance first mod that I can still make look cool. If someone were to request the exterior smoothed, I would have to do a bunch of welding on the inside joints, which would hurt the flow.


    Gawd I hope your not naked right now ;) LMAO!

    Thanks bud, ya should just give in and start looking at colors now..hahahaha :friends:
     
  20. SRTLUVR

    SRTLUVR Detailing "Go-to" Guy

    Messages:
    3,018
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    Birmingham, AL
    No need to look at colors. She'd be all Brilliant Black. Done. I have my birthday August 1st. Lemme see what I can fanagle from my wife. Ya feel me dawg???


    And luckily for my keyboard, I'm not naked now.......but I'm sitting outside on a beautiful Alabama night, smoking a fat spicey cigar, drinkin my share of Sam Adams, and listening to some Ray LaMontagne.......