Had a little issue with my boost-a-pump (how ever you spell it) and called our local San Diego Hemi expert Ralph. Looks like there was a fuse problem from MSD that had the pump go OOC on me. Ralph came to the rescue and bypassed the system so I could get my ride back home.
haha I have rewired my MSD at least 6 times. The b-a-p will over heat the wiring (upgrade to a bigger gauge). Also, before cranking up the motor, turn the key to the on position and wait for all chimes to finish. Then crank her up. This will help prevent wire overload.
Good info, Thanks. Ralph also hooked me up with a by-pass clip if it happens again just in case. As always...You Da Man Ralphy!
