Got some before #'s in the 300.....

Discussion in 'BFNY Performance' started by Hemi31, Mar 19, 2009.

  1. Hemi31

    Hemi31 [email protected]

    Messages:
    1,731
    Likes Received:
    0
    Joined:
    Nov 7, 2007
    Location:
    AuSable Forks, NY
    Well last weekend I drove down to Atco and got a whole 2 passes......first pass spun like hell,second pass ran a 12.2@110 on a 1.71 60'.......not bad but I know she has more in her.I doubt I will be able to hit the track again before the new heads and intake go on.I am hoping to see a very large gain once this motor can breath properly.

    The heads will be ported 2009' 5.7 ..........
    [​IMG]
    [​IMG]
    [​IMG]

    The compression ratio when done will be approxamately 10.8 and these heads have already been proven to outflow a ported 6.1 head......the valves are larger than the 03-08 5.7 head but a tick smaller than the 6.1.This combined with a ported 6.1 intake and larger TB should give a top end gain that is pretty signifigant without a loss of bottom end torque.
     
    Last edited: Mar 19, 2009
  2. The "Reverend" CoolFlo

    The "Reverend" CoolFlo 300C - C = Classy!!

    Messages:
    2,138
    Likes Received:
    0
    Joined:
    Nov 7, 2007
    Location:
    West Chester, PA
    wow .. interesting stuff. You definitely know your shit Erik ..

    Hope that beast puts up some great numbers!
     
  3. 1bad4dr

    1bad4dr Mr. Meany

    Messages:
    19,670
    Likes Received:
    0
    Joined:
    Oct 10, 2007
    Location:
    Corn Country
    Making an already beast into a monster I see. haha

    Go get em Erik.
     
  4. loxmith

    loxmith Recovering Post Whore...

    Messages:
    16,163
    Likes Received:
    0
    Joined:
    Dec 3, 2007
    Location:
    Georgia Tech
    Nice...:thumb:
     
  5. Hemi31

    Hemi31 [email protected]

    Messages:
    1,731
    Likes Received:
    0
    Joined:
    Nov 7, 2007
    Location:
    AuSable Forks, NY
    So theres a best of 12.01@112 on the current set up.The heads are almost done.The 6.1 intake is almost done.And my girlfriend(witchywndy) got me this for my birthday.....
    [​IMG]
    [​IMG]

    Going from an almost stock 5.7 head,intake and TB to a set of heads that flows over 365cfm with a ported 6.1 intake and a 90mm should see some pretty incredible gains.....I am expecting at least a half second in ET.
     
  6. 1bad4dr

    1bad4dr Mr. Meany

    Messages:
    19,670
    Likes Received:
    0
    Joined:
    Oct 10, 2007
    Location:
    Corn Country
    well aren't you "Special". hahaha

    Happy belated Birthday Erik. And yea, you should see a significant gain with what you are doing.

    Good luck buddy.
     
  7. The "Reverend" CoolFlo

    The "Reverend" CoolFlo 300C - C = Classy!!

    Messages:
    2,138
    Likes Received:
    0
    Joined:
    Nov 7, 2007
    Location:
    West Chester, PA
    thats going to be a nice setup .. looking forward to your numbers ..

    btw .. thats a helluva nice gift, hope she didnt have to sell one of her ovaries to buy that thing!!
     
    Last edited: Apr 21, 2009
  8. DRKNE55

    DRKNE55 The Badguy

    Messages:
    4,143
    Likes Received:
    0
    Joined:
    Jan 24, 2008
    Location:
    Oakland, CA
    i thought trojan had a stroker 392 in his 300...
     
  9. Hemi31

    Hemi31 [email protected]

    Messages:
    1,731
    Likes Received:
    0
    Joined:
    Nov 7, 2007
    Location:
    AuSable Forks, NY
    5.7 base with near stock 5.7 heads.
     
  10. HalV48

    HalV48 They Call Me Patron

    Messages:
    5,243
    Likes Received:
    0
    Joined:
    Oct 10, 2007
    Location:
    Chandler, Arizona
    Didn't Trojan run an 11.97 at Firebird?

    He's got your my at least a .10th with weight difference Erik, me too. lol
     
  11. Hemi31

    Hemi31 [email protected]

    Messages:
    1,731
    Likes Received:
    0
    Joined:
    Nov 7, 2007
    Location:
    AuSable Forks, NY
    yeah Hal,and in 2000' worse air....BUT,Trojan had PPP Stage 3 heads and a 6.1 Intake on the car.It was much better breathing back then.Now it has a 5.7 intake and a set of HOP special (read stock) heads.I was laying down 1/8th mile times in the mid 7's on the motor and pulling 1.63 60' times,hanging with 11.5 sec 426's through the 1/8th and then the car would fall on it's face.The cam/head 6.1's were running a hair slower than me et wise but were laying down 6mph more.THESE HEADS AND INTAKE GOTS TO GO!
     
  12. DRKNE55

    DRKNE55 The Badguy

    Messages:
    4,143
    Likes Received:
    0
    Joined:
    Jan 24, 2008
    Location:
    Oakland, CA
    ahhh, i see. he pulled a bunch of his stuff out. for some reason i thought he had a big shot of no2 and a stroker.
     
  13. Hemi31

    Hemi31 [email protected]

    Messages:
    1,731
    Likes Received:
    0
    Joined:
    Nov 7, 2007
    Location:
    AuSable Forks, NY
    N2o still isn't plumbed.
     
    Last edited: Apr 22, 2009
  14. 1bad4dr

    1bad4dr Mr. Meany

    Messages:
    19,670
    Likes Received:
    0
    Joined:
    Oct 10, 2007
    Location:
    Corn Country
    Get busy and plumb. Sheesh. haha