Ok what else can I do I have afco rear shocks and et streets. I am going to be switching back to a drag radial that 27" tall. And a bit wider than the et street I have on there now. Any other ideas?
I'd still run a taller tire than that. My Nitto's are 28.78. I ran consistent 1.65 to 1.68 60's and trapped 122 over 2 years ago with exhaust, mild cam, and a 100 shot. M/T DR 3786r P305/45r18 29x11.50r18
http://www.mandhtires.com/store.php?crn=70&rn=305&action=show_detail will these fit the 17 inch cobra rims veryones useing?? Yea I need to find some one that wants to trade my 17's for 18's. I jumpped on the band wagon when the 17's came out and I could use et streets. They worked great for NA. now its a diffrent story
I had the Cobra R rims and it was close with the 305's. If John gets these to fit, I am all over them. haha
John, I read on a Mustang forum that they fit fine on a 17x9 cobra rim. I'm interested too if these fit in the wheel wells.
There is a thread going on over on the LX Forums about DRs and guys say that the M&H 325/17 do fit witout spacers. Really, the tread width seems to be less than a normal 325/17 and I guess that is why they would fit without rubbing. Some of those guys are using them and really seem to like them. The M&H 325/18 has 1" more tread width and I would think that it would be the same as the 325/17 but it's not. Whether they should be used on a 9" wheel is another question. The M&H website says that they can be. I e-mailed M&H and the answer back was 9" wheel is fine. Inferal called them and got a different answer, something like "I can tell you what you want to hear or I can tell you that I would recommend at least a 10" wheel." (you can read all about it in the thread). Here are a couple of threads that talk about these tires: http://www.lxforums.com/board/showthread.php?t=149389 http://www.lxforums.com/board/showthread.php?t=151217
