402 Performance is now a Techco dealer!!

Discussion in '402 Performance' started by 402 Performance, Oct 20, 2008.

  1. 402 Performance

    402 Performance Performance Consultant

    Messages:
    28
    Likes Received:
    0
    Joined:
    Sep 28, 2008
    ... and because of that, we will soon be able to offer various exciting products to the SRT/C members. Among those, their twin-screw supercharger, seen here:

    [​IMG]

    From Techco's site:

    What makes the TECHCO Reverse-Revolution Twin Screw Supercharger so revolutionary is the unique design (Patent Pending), which optimizes airflow efficiency throughout. Incoming air is fed into the front of the supercharger, not the back like conventional designs. This ensures that the incoming air has minimal turns, eliminating restrictions, before entering into the supercharger housing. Additionally, without the need for a complex inlet tube, the largest possible orifice size is maintained, maximizing air flow efficiencies. The air then flows into the lobes of the Reverse-Revolution asymmetric multi-lobe compressor screws, where it is compressed, not merely moved, as in other forms of supercharging. The compressed air then flows into the intercooler housing which houses (2) intercoolers mounted in an A-Frame configuration to ensure the airflow is evenly distributed to each runner bank. The Patent Pending Twin Intercooler design results in higher cooling capacity and greater thermal efficiencies as the cooling water only has to pass through the intercoolers once, keeping the charge air cool. A further benefit of the front Inlet Design is the additional package space above the supercharger that is used for long high flow Intake Runners, which increases low end torque.

    The resulting design of The TECHCO Reverse-Revolution Twin Screw Supercharger allows air to move through the supercharger quickly and efficiently, without significant heat buildup, and at the highest resulting airflow volume at low boost output. The performance result is maximized horsepower and torque output.


    More details like pricing and preliminary availability will be coming very soon!
     
    Last edited by a moderator: Oct 22, 2008
  2. 1bad4dr

    1bad4dr Mr. Meany

    Messages:
    19,670
    Likes Received:
    0
    Joined:
    Oct 10, 2007
    Location:
    Corn Country
    Congrats Ernie. You guys weren't kidding when you said you were going to get into performance. haha What a way to go.
     
  3. 402 Ernie

    402 Ernie Owner of 402 Motoring

    Messages:
    39
    Likes Received:
    0
    Joined:
    Feb 3, 2008
    Well if your going to do something I guess one should do it as well as you can. All of us here at 402 are eager to get this new Performance division off the ground. Now if only the economy would cooperate
     
  4. Techco-CD

    Techco-CD Supporting Vendor

    Messages:
    296
    Likes Received:
    0
    Joined:
    Sep 18, 2008
    Location:
    3125 E Coronado Street, Anaheim, Ca. 92806
    Welcome aboard sir!!!
     
  5. 1bad4dr

    1bad4dr Mr. Meany

    Messages:
    19,670
    Likes Received:
    0
    Joined:
    Oct 10, 2007
    Location:
    Corn Country
    I am with you on the economy thing Ernie. I have been feeling the construction downfall for the past two years. ugh!

    Hang in there man, if you build it, they will come. ;)