/ Register

NEW Blown 426

Discussion in 'Engine & Performance Modifications' started by dry lakes wheel man, Aug 26, 2008.

Page 1 of 3
  1. Aug 26, 2008 #1
    dry lakes wheel man

    dry lakes wheel man Full Access Member

    Messages:
    117
    Likes Received:
    0
    Joined:
    Nov 12, 2007
    Location:
    LaMirada,Calif.
    I stopped over at CMW and they are getting ready to run their CMW\BDS blown 426 hemi in thier in-house dyno facility. This will be the 1st stage of many configurations.
    Current configuration:
    CMW Prepared 426 Engine (Street Rod)
    BDS 8-71 Supercharged Kit (Pictured)
    Fuel Management (AEM Electroinics)

    They also informed me that they will be testing the following soon:
    6-71 Supercharged (6.1l)
    Paxton Supercharged
    Screw Compressor (Hmmmmmmmm)
    TWM Individual Throttle Body
    TwinTurbocharged

    They have also informed that they will be doing a video of all the dyno runs which I will share as soon as they're available.
    [​IMG]
     
  2. Aug 26, 2008 #2
    sgtstanko

    sgtstanko Want to go FASTER!!!

    Messages:
    1,395
    Likes Received:
    0
    Joined:
    Nov 7, 2007
    Will that fit under a Jeep hood???
     
  3. Aug 26, 2008 #3
    1bad4dr

    1bad4dr Mr. Meany

    Messages:
    19,670
    Likes Received:
    0
    Joined:
    Oct 10, 2007
    Location:
    Corn Country
    Good to see Bob up and around.
     
  4. Aug 26, 2008 #4
    HEMISFEAR

    HEMISFEAR Ur Friendly Canadian

    Messages:
    7,014
    Likes Received:
    0
    Joined:
    Oct 12, 2007
    Location:
    Motor City, Canada
    Wow, that thing is siiiiick!
     
  5. Aug 26, 2008 #5
    dry lakes wheel man

    dry lakes wheel man Full Access Member

    Messages:
    117
    Likes Received:
    0
    Joined:
    Nov 12, 2007
    Location:
    LaMirada,Calif.
    While I was there at CMW, Jerry Mallicoat stopped by and I watched him work on the electronics for the blown 426.

    It was so cool to watch Bob Cousimano & Jerry Mallicoat working together on the blown 426.

    Scott from CMW informed me that testing will begin within the next week.
     
  6. Aug 26, 2008 #6
    Cam

    Cam Management up n smoke

    Messages:
    2,693
    Likes Received:
    0
    Joined:
    Nov 15, 2007
    Location:
    Riverside, CA
    HAHAHA, Very, very nice Ron. Much better then the last time I saw it. :surprise::thumb2:

    I can't wait to see what she'll do.
     
  7. Aug 26, 2008 #7
    1bad4dr

    1bad4dr Mr. Meany

    Messages:
    19,670
    Likes Received:
    0
    Joined:
    Oct 10, 2007
    Location:
    Corn Country
    Very nice...

    Keep us up to speed please.
     
  8. Aug 26, 2008 #8
    Leadfootluke

    Leadfootluke New Member

    Messages:
    267
    Likes Received:
    0
    Joined:
    Dec 13, 2007
    Looks beautiful!
     
  9. Aug 26, 2008 #9
    bee0912

    bee0912 Rumble Bee 0912

    Messages:
    769
    Likes Received:
    0
    Joined:
    Jan 24, 2008
    Location:
    Columbus, OH
    Wow that thing is amazing. that would look bad ass coming out the hood of a tubed magnum! Oh crap im day dreaming again:cry:
     
  10. Aug 26, 2008 #10
    dry lakes wheel man

    dry lakes wheel man Full Access Member

    Messages:
    117
    Likes Received:
    0
    Joined:
    Nov 12, 2007
    Location:
    LaMirada,Calif.
    I would like to thank CAM and TED HARRIS at MOPAR SUPER CENTER for their help in the
    getting those small but invaluable pieces for the project. KUDOS for all the help!!!!
     
  11. Aug 26, 2008 #11
    1FST4DR

    1FST4DR Supporting Vendor

    Messages:
    2,051
    Likes Received:
    0
    Joined:
    Oct 14, 2007
    Location:
    Ft Laud
    Want to trade for a Zex kit???Please!:flowers::grin:
     
  12. Aug 26, 2008 #12
    Stretch

    Stretch Silver Supporting Members

    Messages:
    4,847
    Likes Received:
    0
    Joined:
    Nov 6, 2007
    Location:
    Eastlake Proper
    SWEET! I would gladly cut a hole in my hood for that!
     
  13. Aug 29, 2008 #13
    dry lakes wheel man

    dry lakes wheel man Full Access Member

    Messages:
    117
    Likes Received:
    0
    Joined:
    Nov 12, 2007
    Location:
    LaMirada,Calif.
    More Pics

    Scott from CMW sent over some more pics, so I thought I would share them with you. I was also told dyno testing starts next week.:)

    [​IMG]
    [​IMG]
    [​IMG]
     
  14. Aug 29, 2008 #14
    MOL

    MOL SHOW & PERFORMANCE

    Messages:
    1,844
    Likes Received:
    0
    Joined:
    Nov 7, 2007
    Location:
    SAN DIEGO, CA
    where are the long tube headers? if there was ever a motor that needed them this is it.
     
  15. Aug 29, 2008 #15
    SRT8

    SRT8 MoPower

    Messages:
    638
    Likes Received:
    0
    Joined:
    Dec 23, 2007
    :dribble::thumb2::rockon:
    So freakin sweet.
     
  16. Aug 29, 2008 #16
    1bad4dr

    1bad4dr Mr. Meany

    Messages:
    19,670
    Likes Received:
    0
    Joined:
    Oct 10, 2007
    Location:
    Corn Country
    If you notice, there are sensors in every exhaust port so that the readings are absolutely correct. They are using (I assume) the OEM shorties for Dyno testing purposes only. The LT's will go on after Engine dyno testing is complete. This way the LT's do not have to be drilled into like the shorties.


    Looks like Scott and Bob are nearly ready to begin the dyno testing Ron. Sweeeet.

    Is this motor going in the Salt runner?
     
  17. Aug 29, 2008 #17
    dry lakes wheel man

    dry lakes wheel man Full Access Member

    Messages:
    117
    Likes Received:
    0
    Joined:
    Nov 12, 2007
    Location:
    LaMirada,Calif.
    I'm not sure if Bob and Scott are going to run long tube headers at this point. I know CMW/BDS are developing this package as a kit like the one BDS already has for the Chevy small block. That kit makes between 550 and 700 hp and is very drivable with carburation. As for putting this in the Bonneville racer? Yes it will eventually but whether it will be supercharged or twin turbo'd I'll just have to see.
     
  18. Aug 29, 2008 #18
    1bad4dr

    1bad4dr Mr. Meany

    Messages:
    19,670
    Likes Received:
    0
    Joined:
    Oct 10, 2007
    Location:
    Corn Country
    Awesome Ron.

    Call me.
     
  19. Aug 29, 2008 #19
    The_Main_Event

    The_Main_Event Creme de la Creme

    Messages:
    8,656
    Likes Received:
    0
    Joined:
    Nov 10, 2007
    Location:
    Florida
    amazing!
     
  20. Aug 31, 2008 #20
    Blown7

    Blown7 SRTC Good Guy

    Messages:
    179
    Likes Received:
    0
    Joined:
    Nov 7, 2007
    Having run BDS stuff for years there is definately a change from the first pic posted to the latest with the injector system.
    Is this a Alcohol eating engine?

    Gone is the trade mark 16 injector BDS plate and in it's place is.....?????

    And is this engine going to run a FAST box?????


    Jeff
     
Page 1 of 3