I bought my 8000k lights last June and had to use the electrolitic compacitor to make them not flicker. I could have swore that it was installed inside of the fuse box, not on the outside relay. The directions that were sent to me a year ago worked, the new direstions still cause a flicker... It seems that every post I find has been deleted!!! Any old advice?? The compacitor was accidently removed while in the shop. One of you geniuses have to know!!!
I had the 35w ballast low beam HID kit from AAC, in 6K. I tried wire harness, capacitors, etc to get rid of the flicker. Nothing worked. Then Justin told me that Oracle came out with 50w ballasts. When I was at his shop for a commercial shoot. Justin swapped the oracle 35w ballast for the new 50w ballast. My HID kit fired right up, no flicker since then. Give Justin a call and see if you can get a set of the 50w ballast for your HID kit. Now my low beam 6K HID kit works perfect, no more flickering, no wire harness, truly plug and play.
If that doesn't work, Markus wrote about a tried and true method here: http://www.srtconnection.com/forums/showthread.php?t=1120&highlight=chip
