BMC's Braided Line Kit w/ Clamps for BT Catch Can

We finally put a catch can on our SRT8U last night and in planning out the braided line with fittings set up to add to it, wanted to offer the upgrade to you as well. I'm putting the kits together today/tomorrow and will have pics tomorrow of the full kit as you will receive it, as well as installed on our car. I'm going to be making these in batches, so please post up if you want one when they are ready tomorrow!



BMC Performance Braided Line Kit for BT Catch Can

Kit Components

• (2) Stainless braided line - pre-cut to fit the your engine
• (4) Hose clamps w/ built-in worm gear - your choice of red/blue, red, blue, chrome, brushed nickel or black clamps (please allow 10 days for black clamps)

Price

• 6.1L - $48.88 (click here to order)
• 5.7L - $54.88 (click here to order)
• 3.5L - $58.88 (click here to order)

Installation Instructions:

• Remove both hoses from catch can and intake.
• Install the new braided hoses, which are pre-cut to fit the ones you removed. Loosen the clamps if necessary to slide the hoses on.
• Once positioned, tighten the clamps that are built into the hose ends.

Installation Tools Needed:

• Straight slot screwdriver

-----------------------------

Here are some pics of the various kits/hoses/fittings. Not all options are shown, but this will give you an idea of what they look like. I'll post some installed pics tonight!







Thanks,
Lisa.

P.S. If you don't have a catch can yet, we sell those too! You can get the BT catch can, with your choice of braided line upgrade kit here: http://www.bmcspeedshop.com/product_p/catch-can.htm

 

We use 750 psi Russell hose. That will happen with the rubber hose only, which is another benefit of the braided upgrade.

 

To be perfectly honest, I just put this kit together today and haven't tested it long term. But, we've run these lines for catch can applications on other vehicles and haven't ever had any residue on the outside of the lines.

I'm checking for black fittings right now. The lines are no problem.

There are some all red and all blue clamps as well, but the size I need isn't in stock right now. More to follow on that.

They make all blue but they aren't in stock right now. I'm checking to see how soon I can get those. I've been using these clamps for 2+ years on a very hot 850+ hp car with NO issues at all. I have at least 12 of these clamps in various places, from small lines like these to the radiator hose and the clamps look just like the day I put them on.

 

Sure! Can you measure that one please? We no longer have that set-up ... whistle whistle, LMAO!

 

Sure thing! We can cut the hose whatever length you need and put the clamps on and send it your way!