With all of the new competition out there, we decided to spend a little time in detail about our new engine offerings. 1. We start by inspecting and disassembling the shortblock core 2. Hot tank the block and remove all liquid contaminents 3. Sonic check all cylinder bores 4. Clean oil galleys 5. Bore scope cavities 6. Hand chase threads 7. Validate deck surface 8. Validate Bore Centerlines 9. Bore cylinders 10. Hone cylinders with honing plate 11. Line Hone 12. Hand Clearance for Stroker Kit 13. Balance rotating assembly(we do not depend on factory balance) 14. Install Cam bearings 15. Remove all flashings 16. Chafer all 90 degree corners 17. Radius bottom of all cylinder bores 18. Maintain .0625 chamfer radius throughout oil system 19. Micro-polish all bearing surfaces including wrist pins 20. Micrometer measurement of all bearing surfaces 21. hand match individual bearings to journals maintaining .0001" tolerance to specified clearances Components include the following: K-1 Billet 4.080 crank K-1 H-Beam connecting Rods JE Nascar grade pistons ARP main studs ARP head studs Cleveite H Type Main and Rod Bearings Dura-bond Cam Bearings Mopar Performance Block Plugs Miscellaneous Parts (missing plugs, clips, etc…) Here is some info on K-1 http://www.k1technologies.com Here is some info on JE Pistons www.jepistons.com Without going into too much detail, our engine builders mainstay is building R5P7 356 cubic inch Nascar engines making 800+ horespower. With this capability, its no wonder that we carry an industry leading 3/36,000 mile warranty on our blocks even when supercharged/turbocharged. We are confident that this block is going to further seperate us from the competition and look forward to the new year. As for pricing Shortblock: $6599 Core Charge: $1200 Longblock: $10999 Core Charge: $2200 Longblock includes the 426/392 shortblock, PPP record setting Stage 2 heads, Cometic head gaskets, forged pushrods, new rocker arm assemblys, new timing chain and sprockets, new timing cover, and camshaft of your choice. Both shortblocks and longblocks come with the 3/36,000 mile warranty. Call today to place your order.
If you want a 4.080 stroke it will, but I am using a 3.795 stroke in yours, but I do have some 1200hp H-beam rods coming for your build as opposed to the 800hp I-beam rod.
The $4802 block is made by Indy which is the same block we have in our car currently. The Indy block uses Compstar 4.050 stroke, Compstar H-Beam rods, Mahle Coated Pistons.
Suh-weeeeet!!!!!! (don't tell everyone though!!! LOL) Maybe my new goal is to be a 9 second car and just ignore the 10 second range? LMAO!!!!
