Go Back   Dodge SRT Forum - SRTConnection > The Workshop > Diablosport Q&A


Diablosport Q&A

Diablo Predator issue on 2010 Jeep GC SRT-8


This is a discussion onDiablo Predator issue on 2010 Jeep GC SRT-8 within the Diablosport Q&A forums, part of the The Workshop category!
Wanted to see if anyone else has ran into this... I picked up a brand new Diablo Predator programmer with ...



Reply
 
LinkBack Thread Tools Display Modes
Old 04-02-2010, 04:54 PM   #1 (permalink)
Member

 
Join Date: Mar 2010
Location: Livermore, CA
Posts: 8
Default Diablo Predator issue on 2010 Jeep GC SRT-8

Wanted to see if anyone else has ran into this...

I picked up a brand new Diablo Predator programmer with the latest firmware that supports 2010 6.1 Engines.

When it attempts to save the stock program, it gives me a format error. (and is unable to save the stock program)

Has anyone else seen this on a 2010 Jeep GC SRT-8? I have a thread open on their support forum but figured I would chime in here as well.

Is there a 'break in' program preset from the factory? That is put in place for so many operating hours?
__________________
2010 SRT-8 GC
2005 Ram SRT-10 Heavily Modded - Sold
mmmmtorque is offline   Reply With Quote
Old 04-02-2010, 04:59 PM   #2 (permalink)
 
cmn1's Avatar
SRT and SVT


 
Join Date: Dec 2007
Location: Addison, Il
Posts: 693
Default

Originally Posted by mmmmtorque View Post
Wanted to see if anyone else has ran into this...

I picked up a brand new Diablo Predator programmer with the latest firmware that supports 2010 6.1 Engines.

When it attempts to save the stock program, it gives me a format error. (and is unable to save the stock program)

Has anyone else seen this on a 2010 Jeep GC SRT-8? I have a thread open on their support forum but figured I would chime in here as well.

Is there a 'break in' program preset from the factory? That is put in place for so many operating hours?
You should post this in the Diablosprt Q&A section.

http://www.srtconnection.com/forums/...splay.php?f=95
__________________
Chad

2006 Inferno Red GC SRT8 (SRT Group 1, Nav) PWR 6.3L, Magnacharger 2.3, Kooks Headers w/ Hi-flo cats, Mopar exhaust, Modern Muscle 85mm Throttle-body, Performance Autowerks 4" CAI, CMR Tune, BT Catch Can, Bwoody Sway Bar End Links, F/R Slotted Rotors, Front StopTech Pads, Rear Bendix Pads, PI 2400 TQ Converter, ATI Flex Plate, SHR NAG1-HTCr, BC Racing Coil Overs, Wilwood 6 piston calipers
1996 Mystic Ford Cobra(8200 miles)
cmn1 is offline   Reply With Quote
Old 04-02-2010, 05:13 PM   #3 (permalink)
 
1bad4dr's Avatar
Mr. Meany



 
Join Date: Oct 2007
Location: Corn Country
Posts: 19,670
Default

Originally Posted by cmn1 View Post
You should post this in the Diablosprt Q&A section.

http://www.srtconnection.com/forums/...splay.php?f=95
I moved it to Diablo's section.
__________________
Ron
Speed = Money squared.....
Did you eat an extra bowl of STUPID this morning?
[CENTER]
1bad4dr is offline   Reply With Quote
Old 04-02-2010, 08:51 PM   #4 (permalink)
 
Immo's Avatar
Made in Detroit

 
Join Date: Nov 2007
Location: DC Via Detroit
Posts: 1,079
Default

I didn't have an issue....
__________________
DC Modern Mopar on Facebook
Click the image to open in full size.

2010 Modern Blue Mopar CAI, Spoiler, F&R Door Sill Protectors, Diablo Preadtor, BT Catch Can, BT Under Hood Kit, BT Door Locks. Bwoody Sway Links, Satisfied GranSport 6 Pads, Bel Driver STi, Debaged Jeep Logo F&R, Black Billet Shorty, SRT lower grille badge, Led taillights w/fog harness, Custom SRT floor mats.
Immo is offline   Reply With Quote
Old 04-03-2010, 05:50 AM   #5 (permalink)
 
cmn1's Avatar
SRT and SVT


 
Join Date: Dec 2007
Location: Addison, Il
Posts: 693
Default

Originally Posted by 1bad4dr View Post
I moved it to Diablo's section.
Thanks. Need to keep my area clean.
__________________
Chad

2006 Inferno Red GC SRT8 (SRT Group 1, Nav) PWR 6.3L, Magnacharger 2.3, Kooks Headers w/ Hi-flo cats, Mopar exhaust, Modern Muscle 85mm Throttle-body, Performance Autowerks 4" CAI, CMR Tune, BT Catch Can, Bwoody Sway Bar End Links, F/R Slotted Rotors, Front StopTech Pads, Rear Bendix Pads, PI 2400 TQ Converter, ATI Flex Plate, SHR NAG1-HTCr, BC Racing Coil Overs, Wilwood 6 piston calipers
1996 Mystic Ford Cobra(8200 miles)
cmn1 is offline   Reply With Quote
Old 04-03-2010, 06:18 AM   #6 (permalink)
 
HalV48's Avatar
They Call Me Patron


 
Join Date: Oct 2007
Location: Chandler, Arizona
Age: 70
Posts: 5,243
Default

Originally Posted by cmn1 View Post
Thanks. Need to keep my area clean.
Keep up the good work Chad.
__________________
Hal aka Rodney, Hal dba Rodney

Hal

2006 BB 300C-SRT8
426 since April 2008
Edelbrock e-Charger at 11 lbs
Paramount Nag1 and Custom 4000 converter
690/701 on 93 octane tune no N2O.
HalV48 is offline   Reply With Quote
Old 04-04-2010, 11:40 AM   #7 (permalink)
Member

 
Join Date: May 2009
Posts: 19
Default

Never seen this error. What I would do is call Diablo ASAP and get this issue fixed, cuz normally alot of guys are runnig a Predator without any issues.


Good Luck man!
__________________
Jose
2008 Jeep SRT 8 SBM w/ OPT. 1 and 2 Mods: Volant CAI w Twin Snorkel mod/CORSA Exhaust/ SW 1.875" Headers/Trinity/Toona CMR Tune/XD-16 with LC-1 Wideband/DashHawk/Custom A Pillar/Jet 180* T-Stat/18lb Stant Cap/BT Titanium Catch Can/BT Titanium Underhood Kit/Debadged/R1 Cross/Drill Rotors w/FRT Hawk Pads & Rear CTS-V pads/Toyo Proxe ST II 275/315 tires/Eibach Springs/Rear Fog Harness/MHP Shorty Antenna/Gun Metal Grey Wheels
Knuckles is offline   Reply With Quote
Old 04-28-2010, 04:01 PM   #8 (permalink)
 
Mike@Diablosport's Avatar
Full Access Member

 
Join Date: Jan 2008
Posts: 270
Default

This is pointing to an issue with the Predator itself.

lets get it swapped out asap.
Mike@Diablosport is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On